Post by fujiro on Jan 22, 2023 17:03:25 GMT
Hi,
I own a Fabia 4 2022 Monte Carlo with 1.0TSI 110ch and DSG7, here is the list or the Coding i tested and their status of working / non working.
I'll edit the post with new tested coding when they will come.
Thanks to oranx from Scala page, most of the coding here are from him.
REMEMBER TO ALWAYS MAKE BACKUP BEFORE CODING
Working
SEATBELT WARNING
CONTROL UNIT 17 – DASHBOARD
LONG CODING
SEAT BELT WARNING
VERSION 1 – EU
VERSION 2 – USA
or you can turn it OFF
Comment :
Version 2 is working but was a pain to use, the car is beeping as soon as you start the engine, it eventually stop but was too much pain for me
OFF is turning OFF all seatbelt warning, i would have preffered to have the back only but it is OK
There is a Version 3 in OBD11 but it is not working
CLIMATRONIC AUTO FAN SPEED
CONTROL UNIT 08 – AIR CONDITIONING
LONG CODING
BLOWER DISPLAY IN AUTO OPERATION – ACTIVATED
Comment :
This coding is great, it is also displaying the "AC" icon that is not showing otherwise
BLINKER AMOUNT
CONTROL UNIT 09 – CENTRAL ELECTRICS
ADAPTATION
AuBenlicht_blinker
KOMFORTBLINKEN_BLINKZYKLEN
from 1 to 5 blinks (3 – STANDARD)
if requested :
SECURITY CODE 31347
Comment :
This change the amount of blinker when activating the "light" touch of the blinker activator
VIRTUAL COCKPIT
CONTROL UNIT 17 - DASHBOARD
ADAPTATION
Tube version
variant 3 = Monte Carlo look
Variant 0 (or any other #) = Style look
ADAPTIVE LANE ASSIST
CONTROL UNIT A5 – DRIVER ASSISTANCE
LONG CODING
Point of intervention
Here there is 4 choice :
Late : default setting (you bounce on lane line)
Early : adaptative lane assist : the car maintain the lines, it is pretty strong and the car is constantly correcting, it works great but is kind of weird at the beginning
Late_setting_over_menu : when you start the car you are uin late mode but you can activate adaptative lane assist in the menu : i choosed that mode personnaly
Early_setting_over_menu : when you start the car you are in early mode and you can deactivate it to be in late mode on the screen
Not working
START/STOP DESACTIVATION
CONTROL UNIT 19
ADAPTATION
Start/stop start voltage limit
set to 12.1V (original 7.6V)
Comment : This is not working, i didn't tested higher voltage.
I own a Fabia 4 2022 Monte Carlo with 1.0TSI 110ch and DSG7, here is the list or the Coding i tested and their status of working / non working.
I'll edit the post with new tested coding when they will come.
Thanks to oranx from Scala page, most of the coding here are from him.
REMEMBER TO ALWAYS MAKE BACKUP BEFORE CODING
Working
SEATBELT WARNING
CONTROL UNIT 17 – DASHBOARD
LONG CODING
SEAT BELT WARNING
VERSION 1 – EU
VERSION 2 – USA
or you can turn it OFF
Comment :
Version 2 is working but was a pain to use, the car is beeping as soon as you start the engine, it eventually stop but was too much pain for me
OFF is turning OFF all seatbelt warning, i would have preffered to have the back only but it is OK
There is a Version 3 in OBD11 but it is not working
CLIMATRONIC AUTO FAN SPEED
CONTROL UNIT 08 – AIR CONDITIONING
LONG CODING
BLOWER DISPLAY IN AUTO OPERATION – ACTIVATED
Comment :
This coding is great, it is also displaying the "AC" icon that is not showing otherwise
BLINKER AMOUNT
CONTROL UNIT 09 – CENTRAL ELECTRICS
ADAPTATION
AuBenlicht_blinker
KOMFORTBLINKEN_BLINKZYKLEN
from 1 to 5 blinks (3 – STANDARD)
if requested :
SECURITY CODE 31347
Comment :
This change the amount of blinker when activating the "light" touch of the blinker activator
VIRTUAL COCKPIT
CONTROL UNIT 17 - DASHBOARD
ADAPTATION
Tube version
variant 3 = Monte Carlo look
Variant 0 (or any other #) = Style look
ADAPTIVE LANE ASSIST
CONTROL UNIT A5 – DRIVER ASSISTANCE
LONG CODING
Point of intervention
Here there is 4 choice :
Late : default setting (you bounce on lane line)
Early : adaptative lane assist : the car maintain the lines, it is pretty strong and the car is constantly correcting, it works great but is kind of weird at the beginning
Late_setting_over_menu : when you start the car you are uin late mode but you can activate adaptative lane assist in the menu : i choosed that mode personnaly
Early_setting_over_menu : when you start the car you are in early mode and you can deactivate it to be in late mode on the screen
Not working
START/STOP DESACTIVATION
CONTROL UNIT 19
ADAPTATION
Start/stop start voltage limit
set to 12.1V (original 7.6V)
Comment : This is not working, i didn't tested higher voltage.