|
|
Post by thatvdubguy on Jun 1, 2017 5:34:38 GMT
Anyone else having issues getting your Throttle body adaptation to work? I just get a clicking noise followed with an error. Just wondering if it is just me.
|
|
|
|
Post by thatvdubguy on Jun 7, 2017 4:06:27 GMT
I guess I'll reply to myself...I have done some research and it appears some other people are having this issue. Seems it might be software related... so the only thing we can do is wait for the guys at OBDEleven to work out the bugs and update. If anyone else out there has any input... please reply
|
|
|
|
Post by Dre on Jul 12, 2017 16:46:59 GMT
I just experienced the same issue. Throttle body just clicks and I receive an error. Car is now running, feels like is has good power. But, it will not adapt.
|
|
|
|
Post by thatvdubguy on Sept 12, 2017 16:50:41 GMT
I had the same thing. Car has good power, but will not adapt.
|
|
|
|
Post by Matthew on Dec 9, 2018 5:07:30 GMT
Have you tried this again with the recent 2018 update?
|
|
|
|
Post by jettatdiblack on Feb 16, 2019 20:38:37 GMT
What are you all doing to get that far? I go into engine and basic settings, enter 060 and I get this screen.  |
|
|
|
Post by Matthew on Feb 18, 2019 2:36:56 GMT
Can you please post a complete SCAN of your car? I'd like to know which engine module you have installed?
|
|
|
|
Post by jettatdiblack on Feb 18, 2019 6:35:15 GMT
Can you please post a complete SCAN of your car? I'd like to know which engine module you have installed? Where would I find that information once I complete the scan? Edit: Is this what you are asking for?  |
|
|
|
Post by Matthew on Feb 18, 2019 15:20:46 GMT
1.9 L? I assume it means you have a diesel. If this is the case, then the instructions (and the one-click APP) is for petrol engines. On Ross-Tech's page, I don't see a throttle body adaptation. I only see the kickdown as documented here: wiki.ross-tech.com/wiki/index.php/1.9l_PD-TDI_(BRM) |
|
|
|
Post by jettatdiblack on Feb 18, 2019 20:58:23 GMT
1.9 L? I assume it means you have a diesel. If this is the case, then the instructions (and the one-click APP) is for petrol engines. On Ross-Tech's page, I don't see a throttle body adaptation. I only see the kickdown as documented here: wiki.ross-tech.com/wiki/index.php/1.9l_PD-TDI_(BRM)Yeah, this is in bold on the Ross Tech site. TDI's do not have throttle bodies. |
|
|
|
Post by imagerays on Apr 20, 2019 13:22:31 GMT
I was having problems adapting my throttle body also on my mk4 Jetta. There are a 4 or 5 conditions that need to be met for it to work according to a vag com website. One of those conditions is that the throttle body must be clean. The value 4 would keep popping up "error" and my throttle body was very dirty inside. I replaced the throttle body and it adapted fine on the first try. The value 4 read "success". I hope that helps some! Godbless!
|
|
|
|
Post by Matthew on Apr 21, 2019 17:27:15 GMT
Why didn't you just manually clean your throttle body, and save some money?
Disconnect your old throttle body with the ignition ON in the wide-open-throttle position. Carb cleaner would get rid of the gunk.
|
|
