|
Post by rani13 on Jan 9, 2023 11:31:07 GMT
Hello everyone, I just bought OBDeleven and tried to code the turn indicator as drl, I followed instructions that I found on a different forum but nothing worked. Please help me I have no clue what I did wrong. Code: ENG116937-ENG115902-Leuchte1BLK VRB20-Dimming Direction CD 1 > minimize ENG116937-ENG115906-Leuchte1BLK VRB20-Dimming Direction EF 1 > maximize ENG116937-ENG115909-Leuchte1BLK VRB20-Dimming Direction GH 1 > maximize ENG116937-ENG115897-Leuchte1BLK VRB20-Dimmwert AB 1 > 127 ENG116937-ENG115901-Leuchte1BLK VRB20-Dimmwert CD 1 > 0 ENG116937-ENG115905-Leuchte1BLK VRB20-Dimmwert EF 1 > 0 ENG116937-ENG115908-Leuchte1BLK VRB20-Dimmwert GH 1 > 0 ENG116937-ENG115894-Leuchte1BLK VRB20-Fehlerort mittleres Byte DTC-DFCC 1 > 15 ENG116937-ENG116548-Leuchte1BLK VRB20-Lampendefektbitposition 1 > 3E ENG116937-ENG115892-Leuchte1BLK VRB20-Lasttyp 1 > 33 - LED-Modul Blinkleuchten ENG116937-ENG115898-Leuchte1BLK VRB20-Lichtansteuerung HD AB 1 > Always ENG116937-ENG115895-Leuchte1BLK VRB20-Lichtfunktion A 1 > Blinken rechts Hellphase ENG116937-ENG115896-Leuchte1BLK VRB20-Lichtfunktion B 1 > Daytime running lamps ENG116937-ENG115899-Leuchte1BLK VRB20-Lichtfunktion C 1 > Blinken rechts Dunkelphase ENG116937-ENG115900-Leuchte1BLK VRB20-Lichtfunktion D 1 > not active ENG116937-ENG115903-Leuchte1BLK VRB20-Lichtfunktion E 1 > not active ENG116937-ENG115904-Leuchte1BLK VRB20-Lichtfunktion F 1 > not active ENG116937-ENG115907-Leuchte1BLK VRB20-Lichtfunktion G 1 > not active ENG116937-ENG116549-Leuchte1BLK VRB20-Lichtfunktion H 1 > not active
These are the instructions I followed and nothing changed.
|
|
|
Post by maniek on Jan 9, 2023 13:38:09 GMT
and do not have any errors?
in a factory settings DRL are corelated with indicators
if i understand -- you want to have a DRL in orange colour as indicators?
|
|
|
Post by rani13 on Jan 9, 2023 13:54:15 GMT
No errors in the app but in the car it says :”please check front-left turn signal” and when I make the changes in the adaptation it says adaptation success or something like that, but the lights stay the same
|
|
|
Post by rani13 on Jan 9, 2023 13:55:49 GMT
And now I also don’t remember what I change or how to reset it to the factory settings lmao.
|
|
|
Post by rani13 on Jan 9, 2023 14:01:35 GMT
Yeah I want the indicator lights(orange led stripes) to work all the time and when I use the indicator, I want it to flash on and off. I think it’s possible cause I saw a couple of superbs like that.
Thank you for replying..
|
|
|
Post by rani13 on Jan 9, 2023 14:02:17 GMT
and do not have any errors?
in a factory settings DRL are corelated with indicators
if i understand -- you want to have a DRL in orange colour as indicators?
Yeah they are the same led stripe.
|
|
|
Post by maniek on Jan 9, 2023 14:04:11 GMT
yep, cause almost all front lights are define in parameters
6 ABL LC5 7 ABL RB1
and now you want to code once again indicator lights in parameters
0 BLK VL B36 1 BLK VR B20
and system doesn't know which parameter should control indicators lights
|
|
|
Post by maniek on Jan 9, 2023 14:08:54 GMT
as you wrote- changes have been made for right indicator and now car informs about left turn signal?
so maybe when you make this procedure for left side-- it will work?
|
|
|
Post by maniek on Jan 9, 2023 14:12:25 GMT
in my opinion when you want to back to original settings, parameter
Leuchte1BLK VRB20-Lasttyp 1 > set to inactive
|
|
|
Post by rani13 on Jan 9, 2023 14:15:56 GMT
Yeah I’m sorry, I made changes to leuchte 0 blk vl b36 It’s the left turn signal.
|
|
|
Post by rani13 on Jan 9, 2023 14:16:45 GMT
Yeah but I still want the indicator lights to be always on, can it even be done?
|
|
|
Post by maniek on Jan 9, 2023 14:27:14 GMT
sorry but i don't know... for cars without matrix lights it is possible but with...?
could you share where this procedure coming from?
|
|
|
Post by rani13 on Jan 9, 2023 15:02:23 GMT
|
|
|
Post by maniek on Jan 9, 2023 16:44:18 GMT
as supposed--- this procedure is for cars with no matrix lights
a new ones have individual lamp modules --- coding is not available, not possible
maybe someday....
|
|
|
Post by rani13 on Jan 9, 2023 16:58:26 GMT
Thank you so much for your help!!
|
|
|
Post by rani13 on Jan 10, 2023 11:47:44 GMT
after searching the web i found this picture which proves it can be done, but i still dont know how?
|
|
|
Post by maniek on Jan 10, 2023 15:04:36 GMT
as i mentioned yesterday--- it's available for non matrix lights
this car has xenon lights-- before 2019 FL
|
|