|
Post by rafaelsgon on Dec 29, 2022 1:09:55 GMT
Hello guys!!
Does anyone know how to permanently disable the start stop of the Jetta GLI 2022? I’ve already done the procedure to change the battery voltage from 7.6 to 12 or 12.1 but it activates normally and after a few engine starts the system starts operating again. Can Gateway 19 > Adaptation
EM start stop requirement ambient temperature shows as not available....
Deactivation of start stop procedure for "non-active mode", but the car central change automatically...
Thanks in advance
|
|
final
New Member
Posts: 5
|
Post by final on Sept 29, 2023 8:52:16 GMT
Must use Chinese cable. No coding
|
|
|
Post by jonatanpeixe31 on Dec 12, 2023 3:00:26 GMT
I myself developed a control unit for the new start stop system
|
|
|
Post by zg1400a9 on Jan 4, 2024 21:37:42 GMT
Hello, Rafael. Try setting the voltage to 16volts. The battery will never reach that voltage unless the voltage regulator fails. Normal charging voltage is 14 voltd, so 12 volts is always available. Please let me know if this works for you. I found the place to change the voltage setting but couldn't change the setting. I would like to know you changed it.
|
|