WdV
New Member
Hi!
Posts: 2
|
Post by WdV on Dec 28, 2022 17:47:49 GMT
Hi! I'm new to OBDEleven, having received the Ultimate bundle as a surprise christmas gift.
I've used several of the apps on my 2016 VW Passat GTE, all successfully except for one: Folding Mirrors on Ignition. By default the mirrors will fold down into operational position upon unlocking the car by remote. I used the app to change this to 'Ignition On'. Despite the app indicating it's made its change successfully, the behavior of the mirrors upon car unlock by remote does not change. I've re-applied the change multiple times, unsuccessfully.
Edit: Seems the 'Gauge Test - Needle Sweep' also does not apply like it should.
2016 Volkswagen Passat GTE Engine code: CUKC
OBDeleven v0.62.0 (10633) Android
|
|
|
Post by sprucepassatb8 on Jan 9, 2023 11:36:00 GMT
You shouldn't use these one-click apps. Because u never see what's happening.
For Gauge/Needle swapping try: STG 17 (Schalttafel Einsatz) Coding / Long Coding Activate in Byte 1 Bit 0
Folding mirrors has only two variants: 1. Folding if close / open the car 2. Folding if close and hold key long and I think if u turn on ignition after open the car, mirrors will go with ignition STG 09 Zentralelektrik Zugriffsberechtigung: 31347 Anpassung / Adaption Spiegelverstellung (vorher Zugangskontrolle 2) -by convenience Operation via remote control key (langes Drücken der Absperrtaste auf der FB) Or -by lock command via remote control key (kurzes Drücken der Absperrtaste) -> this is the standard I think
|
|