So my girlfriend has a 2012 Polo GTi with a CAVE engine that is a Japanese import in NZ. It is throwing 3 fault codes for some things in the ABS system which also throws codes for engine and gearbox speed sensors etc. I cannot access the ABS module using OBDeleven at all. It comes up with an error message that the module can’t be accessed yet it does talk to the module to the extent that it finds 3 faults. I had this once in the past with this vehicle when it had a faulty wheel speed sensor on one of the rear wheels. Same thing couldn’t access the ABS module using OBDeleven. I had a friend bring around his professional workshop code reader from his workshop and it accessed it fine. Is OBDeleven just not capable of accessing this module on the GTi Polo twincharger model? I wouldn’t have thought the ABS module would be anything other than the same as all the other Polos or Golf’s?
majbaszajba: Im an idiot 🤪😅🤪😅
Sept 23, 2023 10:05:08 GMT
yusufturkoglu1604: Hello, I want to turn on the horn sound when locking and unlocking my VW Transporter 2011, but I cannot adapt it to the central electrics, can you help me?
Sept 23, 2023 13:47:51 GMT
rapidmonk: Byte 09 Bit 5 Front Power Windows installed , this shows as "not installed" in skoda rapid even though it is installed , any solution for the same. ??
Sept 24, 2023 19:42:46 GMT
oleksandr312: Tell me how to activate the high beam assistant in ID 3 Chinese version
Sept 25, 2023 11:39:36 GMT
ozan: Hi guys, my seat ibiza 2019 has something named ECO which automatically disengage clutch when not pressing acceleration pedal, i want to disable this. Is there any configuration for disabling this?
Sept 25, 2023 19:57:48 GMT
draugluin: Hi guys, I have a Kamiq, I activated the adaptive lane guidance but the hands on the steering wheel warning comes out continuously and not every 10 seconds as it should... has anyone solved this???
Sept 26, 2023 7:59:29 GMT
enrico: Good day, I need a coding for a conversion from matrix to HD matrix of an Audi A6 C8 Avant year 2019. So from 8G4 aug 8G5 - I hope someone can help.
Sept 26, 2023 9:32:13 GMT
proid4: Good morning everyone. Anyone can help with reset service interval in ID4 2021 3.1 software. It says nothing there. Also one click app says its not supported.
Sept 26, 2023 11:48:36 GMT
draugluin: How to update camera software with obd?
Sept 27, 2023 12:57:20 GMT
drrck: Is anyone aware of an SDF outage, I was able to unlock a module to perform service several hours ago and now all I get is SDF Problem error message.
Sept 27, 2023 14:42:37 GMT
whataboutthis: drrck do you mean SFD (Just making sure) if yes did you have your bonnet open. Not seen anything saying there are issues on facebook
Sept 27, 2023 17:26:32 GMT
malaudi: I reset all adaptations by mistake on my 2017 Audi Q7, can anybody tell me how I can re-calibrate everything on the A5 module I don’t have a back up, I am getting pre sense malfunction thank you!
Sept 28, 2023 2:45:43 GMT
mensreaa7: 2016 A7 w/o adaptive cruise. My cruise control will randomly be available and then not. ANY clue why this is happening or how to fix it?
Sept 29, 2023 17:27:30 GMT
devastationrs7: Good day, Does anyone have the long coding so as to remove the top speed limiter on a 2018 RS7?
Sept 30, 2023 11:10:08 GMT
boogiebill: Can you change the mileage readout in Garage from Kilometres to Miles?
Sept 30, 2023 16:49:34 GMT
olldawg: anyone know the security code for module 9 (electrical) on an id.4?
Sept 30, 2023 23:18:08 GMT