Post by saulheno on Dec 12, 2022 11:54:54 GMT
Hey guys,
i’m currently following this guide: sites.google.com/site/1810martin/b6-cruise-control-retrofit?pli=1
It says near the end to go to the engine module and do this:
“
Select function 11
Enter the code 11463
Click “Do It”
“
this is to tell the ECU it has cruise control.
this is VCDS obviously, and i’m pretty sure it’s a section called “coding II”
Is there an equivalent way to do this on OBDEleven? I’m using iOS but can switch to android if needed. I can’t find any way to do this.
Is there a hex/byte i can go to in long coding?
Thanks!
i’m currently following this guide: sites.google.com/site/1810martin/b6-cruise-control-retrofit?pli=1
It says near the end to go to the engine module and do this:
“
Select function 11
Enter the code 11463
Click “Do It”
“
this is to tell the ECU it has cruise control.
this is VCDS obviously, and i’m pretty sure it’s a section called “coding II”
Is there an equivalent way to do this on OBDEleven? I’m using iOS but can switch to android if needed. I can’t find any way to do this.
Is there a hex/byte i can go to in long coding?
Thanks!