Post by shoptb1 on Dec 12, 2022 2:26:40 GMT
Hi everyone,
I did my first attempt at long coding, and it didn't turn out so great. The trouble started when I mistakenly coded "lwr_activation" from "enabled" to "not_enabled" (4B Multifunction Module). The car then threw two errors: Audi Adaptive Headlight error, and High-Beam Assistant error. I immediately reversed "lwr_activation" back to "enabled", but the errors will not clear. I've cleared faults, but the problem just reappears after about 30 seconds. I've checked the history log and all of the other settings are back to their original values, but the errors persist. Is there some secret to getting these functions reenabled?
The status of the 4B Multifunction Module are as follows:
4 Faults -
1) Matrix high beam left - no basic setting. Fault code C117554. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
2) Matrix high beam right - no basic setting. Fault code C117654. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
3) Headlight - no basic setting. Fault code C107E54. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
4) Release active. Fault code: B184C00. Status: static. Priority: 3. Malfunction frequency counter: 1. Unlearning counter: 255.
Cheers and thanks in advance.
Brad
2022 Audi 8Y S3 Prestige (US/North America version)
I did my first attempt at long coding, and it didn't turn out so great. The trouble started when I mistakenly coded "lwr_activation" from "enabled" to "not_enabled" (4B Multifunction Module). The car then threw two errors: Audi Adaptive Headlight error, and High-Beam Assistant error. I immediately reversed "lwr_activation" back to "enabled", but the errors will not clear. I've cleared faults, but the problem just reappears after about 30 seconds. I've checked the history log and all of the other settings are back to their original values, but the errors persist. Is there some secret to getting these functions reenabled?
The status of the 4B Multifunction Module are as follows:
4 Faults -
1) Matrix high beam left - no basic setting. Fault code C117554. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
2) Matrix high beam right - no basic setting. Fault code C117654. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
3) Headlight - no basic setting. Fault code C107E54. Status: static. Priority: 2. Malfunction frequency counter: 1. Unlearning counter: 40.
4) Release active. Fault code: B184C00. Status: static. Priority: 3. Malfunction frequency counter: 1. Unlearning counter: 255.
Cheers and thanks in advance.
Brad
2022 Audi 8Y S3 Prestige (US/North America version)
