Post by agim on Dec 11, 2022 23:32:19 GMT
Hello everyone,
I managed to code (deactivate) my Tiguans Start-Stop system with this following procedure that I am going to share with you guys.
But will be really nice, especially for newbies to have an One click app for this.
Here's what is happening on long coding:
( This is "temperature way" Start-Stop deactivation)
Control module 19 > Long adaptation > Channel 013
switch to HEX made by tapping As all
change adaptation value from 00XXXX to FFXXXX (im my case was 002000 and I changed toFF2000)
Tap the green button to test and again for accept
For now engine won't turn off because start-stop requirements are not met, in this case 77.5 degrees celsius
I managed to code (deactivate) my Tiguans Start-Stop system with this following procedure that I am going to share with you guys.
But will be really nice, especially for newbies to have an One click app for this.
Here's what is happening on long coding:
( This is "temperature way" Start-Stop deactivation)
Control module 19 > Long adaptation > Channel 013
switch to HEX made by tapping As all
change adaptation value from 00XXXX to FFXXXX (im my case was 002000 and I changed toFF2000)
Tap the green button to test and again for accept
For now engine won't turn off because start-stop requirements are not met, in this case 77.5 degrees celsius
