Post by bighun on May 22, 2017 22:13:44 GMT
Hi, new to this forum, I had the dongle for several month but unpack it only today for first time.
Initiated the Pro with a code from the bag.
Bought some 100 credits with planning to do some changes on my 2017 audi A4 B9:
- needle sweep
- not seeing to program "windows down/up with a remote"
- VIM
just something to start with.
The bluetooth connected, the OBD11 app recognized my vehicle detailes, I assume these were communicating and no problems.
Doors closed injection ON engine not running. Sitting in my garage and wifi is strong signal.
Let say I did a change for "needle sweep" from OFF to ON, click on green check mark. Test with injection OFF and engine ON and didn't do nothing, no change.
Went back to the app, it was still OFF.
Then I started testing other random things, the OBD11 didn't remembered any change when I got back to check into that specific app, all was as initially...
What is a possible cause for this phenomena?
Initiated the Pro with a code from the bag.
Bought some 100 credits with planning to do some changes on my 2017 audi A4 B9:
- needle sweep
- not seeing to program "windows down/up with a remote"
- VIM
just something to start with.
The bluetooth connected, the OBD11 app recognized my vehicle detailes, I assume these were communicating and no problems.
Doors closed injection ON engine not running. Sitting in my garage and wifi is strong signal.
Let say I did a change for "needle sweep" from OFF to ON, click on green check mark. Test with injection OFF and engine ON and didn't do nothing, no change.
Went back to the app, it was still OFF.
Then I started testing other random things, the OBD11 didn't remembered any change when I got back to check into that specific app, all was as initially...
What is a possible cause for this phenomena?