|
|
Post by turnedaround on Oct 2, 2020 15:13:31 GMT
Hello all,
As I attempt to connect a light bar, is it possible to code an unused fuse location in the engine bay to allow the bar to activate when the highbeams (or front fogs preferably) are put on?
This would allow me to not penetrate the firewall, which is proving to be difficult.
Cheers.
|
|
Lazar
New Member
Posts: 13
|
Post by Lazar on Mar 3, 2022 15:15:57 GMT
Hello everyone.
I am a new member of the OBD group. Please if anyone can help me and tell me how to get the DRL to turn off through coding and adaptation when we turn on the turn signal? (One click app is "DRL with turn signal"), but that feature doesn't work for me. This is a Škoda Octavia 2015 Saloon
|
|
Lazar
New Member
Posts: 13
|
Post by Lazar on May 8, 2022 19:49:45 GMT
Hello everyone.
Before I start using OBDEleven, my tail lights on my Skoda Octavia 2015 work fine. After some One-Click-Apps, my left rear tail light not work fine, fog light does not work as a parking light such as on right side, where fog light brigtness about 20-30%.
Please tell me what I need to check to solve this issue?
Also when I unlocking the car, both tail light for fine as before that issue, but when I switch light on or position light on, this light does not work.
I tested bulb, and bulb is okay. When I turn on fog light, works fine.
Can someone give me the instruction to check values on both rear tail light, what are the left and right light settings called?
|
|
Lazar
New Member
Posts: 13
|
Post by Lazar on May 8, 2022 20:00:32 GMT
How do I activate both rear fog lights to work as parking lights at about 50% brightness?
Škoda Octavia 2015 Saloon
|
|
tmvag
New Member
Posts: 5
|
Post by tmvag on Jun 19, 2022 5:40:40 GMT
Hello, have you tried reverting all of your changed apps. Nice thing to do is before using an app to make a backup. |
|
|
|
Post by dylan13 on Aug 1, 2022 13:13:04 GMT
Hello there,
How can i activate Skoda Smartlink on an 2013 car with a new skoda radio installed from 2017.
Is there an OBDeleven coding for Smartlink
Thanks for the help,
Dylan
|
|
|
|
Post by elhajemostefa on Aug 19, 2022 16:29:40 GMT
how to activate central lock with ING
|
|
|
|
Post by szmigpio on Oct 8, 2022 15:40:17 GMT
Do you know how to switch off of control bulb control in parking lights? I already changed for LED I I still have error on dashboard. Octavia 3 rs 2015r.
|
|
|
|
Post by negative on Feb 21, 2023 20:56:14 GMT
Hello
Obd can coding/adapt bixenon headlights on skoda rapid PQ25?
Message from one who install but not with obd11
Parking lights or whatever they are called, you still need to check the box, and also score these values in the BSM block: 20 bytes - 07 and 23 - 28, 25 - 06, 18 - 40, 19-56, 22 - A7, 24 - C0
Happy to order but if it cannot do that?
|
|
|
|
Post by davideddd on Mar 15, 2024 18:30:05 GMT
Hello everyone. Before I start using OBDEleven, my tail lights on my Skoda Octavia 2015 work fine. After some One-Click-Apps, my left rear tail light not work fine, fog light does not work as a parking light such as on right side, where fog light brigtness about 20-30%. Please tell me what I need to check to solve this issue? Also when I unlocking the car, both tail light for fine as before that issue, but when I switch light on or position light on, this light does not work. I tested bulb, and bulb is okay. When I turn on fog light, works fine. Can someone give me the instruction to check values on both rear tail light, what are the left and right light settings called? Did you find a solution? I have the same problem, left rear light doesn't work anymore as normal position light, but it works as fog rear light. |
|
atoni
New Member
Posts: 10 
|
Post by atoni on Apr 18, 2024 13:21:37 GMT
|
|
vfi
New Member
Posts: 1
|
Post by vfi on May 9, 2024 6:16:42 GMT
HI Guys, I have an Octavia III, 1.4TSI CZDA, 2016, basic touch swing multimedia without BT. I would like to turn on Oil temperature display. I try it via one-click apps and with coding byte 10 bit 1. It always says function not available. What am I doing wrong? Or my car can't do it?
Is there any other way to get the oil temperature working?
Would an offroad display work on my multimedia system, which could display the oil temperature?
|
|
|
|
Post by damirb on May 15, 2024 7:08:04 GMT
Hello guys, I have an Octavia VRS MK3 2015y (model 2016 year), recently I installed Columbus MIB 2.5 and a 9.2" display, for now everything works as it should  . Can someone help me to make a different color on the mmi display and on the small central aid screen (Backgroundlightning)? I tried to do it myself to get the colors for the background lighting, but the gray color is just displayed. I don't nead to have all colors, one color for background lighting (red or green) would be enough. If someone had a similar experience and managed to do it, I would be very grateful for your help. Thanks in advance. |
|
|
|
Post by goncalves666 on Jul 17, 2024 11:14:52 GMT
Hi,maybe someone here can help me.Retrofitted a BCM high ending in 086 AK, previously i had 086 N,I'm almost sure the new BCM came from a car with front assist and bi-xenon,my car don't have any of that.halogens all around,front and back fogs and the high beam also serves as a parking light,reduced to 30%,tried changing the forbidden to look at byte 18,no luck anyway.Does anyone knows the adaptations for getting lights to work properly?
|
|
|
|
Post by goncalves666 on Jul 17, 2024 11:53:57 GMT
btw,the car is a skoda octavia 3 1.6 tdi from 2013
|
|
.