|
Post by bluecity on May 21, 2017 12:35:38 GMT
I used OBDeleven to aktivate the laptimer.
After that I found additional changes in the protocoll: (done about a minute later, automatically???)
STG 17: Old value: 1384110003010008000000 New value: 138C110003010008000000
STG 5F:
Old value: 010100010006A1ED01802B4E000000030001 New value: 010100010006A1ED01802F4E000000030001
Could someone help me in that case? I'm sure I have done nothing additional, just used the app "Lap Timer" to switch it on.
Thank you!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 22, 2017 9:23:47 GMT
Bluecity I have had this as well and it has not caused me any issues. Just seen this posting whilst looking to solve another issue www.golfmk7.com/forums/showthread.php?t=31279 which seems to suggest this coding change is as a result of using an app to make changes. Cheers
|
|
|
Post by bluecity on May 23, 2017 15:29:25 GMT
Thank you. In another board they explained it to me, that this ist the result of enambling the laptimer.
There you get the oil temparature: (5F) Byte 10, Bit 3
Laptimer: (17) Byte 1, Bit 3
As you already wrote: Wenn you go into the control unit, then the long coding (of the laptimer and oil temperatur) shows up. Everything OK! Annoying is the date and time which shows up there...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2017 15:39:29 GMT
Thanks that's very helpful to know.
|
|