|
|
Post by OBDeleven on Feb 5, 2016 20:36:42 GMT
Emergency Break/Flashing Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 16
Bit 1 Activate
Bit 2 Activate
Activation of Coming Home/Leaving Home
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 10
Bit 1-Bit 2 Activate
Activation of Tear Wiping
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 4 Activate
Disabling Horn When Car Doesnt Work
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 17
Bit 3 Activate
Activation of Bluetooth Audio
Select Control unit 77 (Telephoe)
Control unit Long Coding
Byte 4
Bit 0 DeActivate
Deactivation of Beep Tone at Bluetooth Connection
Select Control unit 77 (Telephoe)
Adaptation
Bluetooth Acknowledge Signal
New Value:off
Heating Mirrors and Windows in Case Of Freeze
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 3-Bit 4 Activate
Rain Close
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 4
Bit 6 Activate
Select Control unit 09 (Central Electrics)
Control unit Long Coding
RLS Sub Selection
Byte 4
Bit 2 Activate
Activation of Rain Sensor
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit1 Activate
Select Control unit 09 (Central Electrics)
Control unit Long Coding
RLS Sub Selection
Byte 4
Bit 5 DeActivate
Disabling Rear Wipe in Rear Drive
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 3 DeActivate
Highway Lights at 140 km/h
Select Control unit 09 (Central Electrics)
Control unit Long Coding RLS
Byte 0
Bit 0 Activate
Activation of DLR
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 23
Bit 6 Activate
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 12
Bit 1 Activate
Coming Home/Leaving Home with Fog Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 13
Bit 6 DeActivate
Cornering Fog Light Activation
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 21
Bit 3 Activate
Activation of Comfort Blink
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 12
Bit 5 Activate
Turn of Interior Light with Ignition
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 12
Bit 2 Activate
Locking Acknowledge with Blinkers
Selecct Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 0 Activate
Unlocking Door when Stop the Car
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 0
Bit 3 Activate
Locking Door up to 15 km/h
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 0
Bit 4 Activate
Locking Door After 30 sec
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 4
Bit 5 DeActivate
Disable Seat Belt Warning
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 1
Bit 1 DeActivate
Pointer Test
Select Control unit 17 (Dashboard)
Adaptation
Channel staging'i Seçin
Select Value:Active
Lock Acknowlegde with Horn
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 1-Bit 4-Bit 7 Activate
|
|
kavih
New Member
Posts: 5 
|
Post by kavih on Jul 8, 2016 22:51:56 GMT
these long codings value are correct? I can't success it. but, some features were done via adaptations.
|
|
|
|
Post by clexens on Nov 3, 2016 17:02:25 GMT
Hi,
I just puchased the OBDEleven PRO. And received it yesterday.
First of all, I thought there was much more applications for my Skoda Fabia 2016/2017.
There are only 2 applications i can active. None of them makes sense. They other 2 are some service.
I have also tried the codes above, but it seems like they dosn't work as well?
In my mind this product is not as promissing as I expected.
I thougt the product was more or less plug and pay. But, it seems like allot of applications are missing and I have to do allot of the work myself?
I really like if some one can provide me a coding list or is able to roll out some more applications for the Skoda Fabia 2016/2017.
|
|
|
|
Post by tuna on Jan 22, 2017 2:34:21 GMT
I agree with your clexens. Obdeleven staff should work on Skoda cars, particular in Fabia. Under these conditions, the product is disappointment unfortunately. |
|
|
|
Post by Daniel (Germany) on Jan 22, 2017 13:06:25 GMT
Hey guys. Yes you have to do codings by yourself. Some cars have more apps then other. If you work a Little with dongle and read a bit here in forum you will be able to a lot of things, and when you do it by yourself you will see and know which changes you have made. To think that obd is a wonder dongle and you only have to say : car make these changes and, hokus pokus its done, is wrong. I dont know where you have read that for coding you want there is an app. Round 50 bugs for what the dongle can do is really cheap.
Best regaards
|
|
|
|
Post by yankarinrg on Feb 12, 2017 13:17:36 GMT
//----------Working on a plate 16 Fabia----------
NEEDLE STAGING
- ECU17 (Instruments)
- Coding
- Byte 1
- Bit 0: enabled (Default: disabled)
//-----------------------------------------------
LAP TIMER
- ECU17 (Instruments)
- Coding
- Byte 1
- Bit 3: enabled (Default: disabled)
//-----------------------------------------------
HILL HOLD CONTROL
- ECU03 (Brakes)
- Coding
- Byte 22
- Bit 0: enabled (Default: disabled)
//-----------------------------------------------
REFUEL QUANTITY
- ECU17 (Instruments)
- Coding
- Byte 10
- Bit 4: enabled (Default: disabled)
//-----------------------------------------------
STATIC CORNERING LIGHTS THROUGH FOG LIGHTS
- ECU09 (Central electronics)
- Adaptations
//-----Left-----
- "Leuchte12NL LB40"
- "Lichtfunktion B 12"
- Set "Abbiegelicht links" (Default: "nichts")
//-----Right----
- "Leuchte13NL RB3"
- "Lichtfunktion B 13"
- Set "Abbiegelicht rechts" (Default: "nichts")
|
|
|
|
Post by dildmand on Aug 18, 2017 7:12:40 GMT
Heating Mirrors and Windows in Case Of Freeze
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 3-Bit 4 Activate
Hey there. Does anyone know if this would make it possible to turn on the side Mirror heating with the rear Mirror heating button? Thanks in advance
|
|
|
|
Post by parigot47 on Mar 19, 2018 18:19:20 GMT
Coming Home/Leaving Home with Fog Lights Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 13 Bit 6 DeActivate Hello, I can not make this function work  Did one of you manage to activate it ? (Fabia 2017) |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 19, 2018 18:49:45 GMT
parigot47 on the Golf and Leon the long coding under control unit 09 has been turned off (for the facelift models) and its been put into the adaption channel.
Have a go with this coding and see if you have all the elements and it works.
Auto Coming Home Lights thanks to vwroc
09 Central Electronics
Adaptation
Select – Aussenlicht_Uebergreifend
Coming Home Verbaustatus - From manual to automatic
|
|
|
|
Post by parigot47 on Mar 20, 2018 10:07:20 GMT
Thank you for your answer Cupra280.
Actually the option to modify is in adaptation.
09 Central electronics
Adaptation
Comfort illumination
Coming home leuchten
From low beam to fog light
Works perfectly :-)
|
|
|
|
Post by parigot47 on Mar 20, 2018 11:32:09 GMT
For information, the codings that i validated for a Fabia 2017
Needle staging
Control unit 17 (instruments)
Control unit long coding
Byte 1
Bit 0: activate
Refuel quantity
Control unit 17 (instruments)
Control unit long coding
Byte 10
Bit 4: enabled
|
|
|
|
Post by parigot47 on Mar 25, 2018 14:20:37 GMT
Lighthouse call with fog lights (in addition with high beam)
Control unit 09 (central electrics)
Adaptation
Leuchte12NL LB40 ---> Light_Function_B_12 ---> Lichthupe
Leuchte13NL RB3 ---> Light_Function_B_13 ---> Lichthupe
No bip when open door with engine running
Control unit 17 (dash board)
Adaptation
Ignition active message, actuator
No display
Valided for a Fabia 2017 :-)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 4, 2018 9:58:34 GMT
Hi, I have a strange problem with comfort blink: I found the “Komfortblinken Blinkzykle” Adaptation. The advertised value in obd11 is 1-3, but the factory setting is 5. And my comfort blink make only 3 blink with this “5” setting… I tried to factory reset the ODB (some people say that the value is read only after a reset: forums.ross-tech.com/showthread.php?8497-Turn-signal-quot-comfort-blinks-quot-adaptation-not-working-on-2017-VW-GTI&p=100249&viewfull=1#post100249), same thing, only 3 blink. Do you have any idea ? I would like to have it to 5 blink. [Edit] So it's funny. I played a bit with this adaptation (the change is taken in effect immediately so it's easy). Obdeleven says that admissible values are 1-3. But the fabia accept 2-5. The fun part is that 2, 3, 4 setting blink..... Tada !!! 2 times !!! 5 setting blink 3 times. Since higher values are refused, it seems that it's not possible to make comfort blink blink 5 times. Sad. If anyone have an idea, you are welcomed ! |
|
crow
New Member
Posts: 29
|
Post by crow on May 12, 2018 12:18:55 GMT
Hello !
Fabia polo ibiza doesnt take more than 3,central electric is a little bit limited compared to octavia 5E and leon 5F
|
|
talkrabb
New Member
Fabia Estate 2017
Posts: 1
|
Post by talkrabb on May 20, 2018 20:42:51 GMT
Disable engine start-stop (sorry, the log is in German):
Anpassung
Steuergerät: 19 Diagnoseinterface für Datenbus
Name: Deaktivierung der Start-Stopp-Funktion
Werte:
Alter Wert: Modus nicht aktiv
Neuer Wert: Stoppverbot, keine Startanforderung
|
|
|
|
Post by marcomomma on Jul 4, 2018 9:11:34 GMT
Hello
I would like to buy obd11 for
my skoda fabia nj3.
I saw that you can intervene to open the windows with the remote control and the
beep when I insert the alarm.
I did not find anything for the dial staging / needle sweep
|
|
|
|
Post by Thirsty on Jul 4, 2018 10:00:03 GMT
Hello I would like to buy obd11 for my skoda fabia nj3. I saw that you can intervene to open the windows with the remote control and the beep when I insert the alarm. I did not find anything for the dial staging / needle sweep Control Unit 17 -> Coding -> Byte 01 -> activate Bit 0 |
|
|
|
Post by marcomomma on Jul 4, 2018 10:02:55 GMT
thank you
then proceed with the purchase
|
|
|
|
Post by Thirsty on Jul 4, 2018 10:36:42 GMT
thank you then proceed with the purchase But note that needle sweep isn't working with all cars! |
|
|
|
Post by marcomomma on Jul 4, 2018 11:26:38 GMT
azz
so no one tried it?
that's why it's not in the obdeleven apps
|
|
djek
New Member
Posts: 1
|
Post by djek on Aug 8, 2018 18:25:28 GMT
Bonjour,
J'ai acheté OBDELEVEN en version Pro et j'en suis très content , j'ai activé quelques options comme les corner ligoté , le coming home / leaving home . Mais je n'arrive pas à faire fonctionner le Lock/Unlock acoustic confirmation , j'ai essayé par l' appli pour 10C et en long coding mais rien ne marche , est ce que quelqu'un la activé .
Est ce que quelqu'un connaitrait le codage pour baisser le rétroviseur passager en marche arrière .
Merci d'avance
Djek
|
|
f0874
New Member
Posts: 6
|
Post by f0874 on Nov 13, 2018 14:11:18 GMT
Hi
i cant found this value
"Aktive Blinkfunktion hat ein auf 1
gesetztes zugeordnetes Bit in
pa_dynamisch_blinken"
|
|
|
|
Post by marcomomma on Nov 19, 2018 18:54:05 GMT
guys I have problems with the app opening and closing banding from the remote control. does not work! in the machine in the settings the check appears but does not work how can I do ? do I have to activate something in manual coding? for golf 7 I read this: Select Central Electrics 09 Adaptation Access Control 2 comfort opening and set to active comfort closing and set to active funk komfort oeffnen and set to active funk komfort schilessen and set to active Menuesteuerung komfortbedienung einstellbar and set to adjustable Read more: forum.obdeleven.com/thread/1692/convenience-key-window-opening-closing#ixzz5XKPtEn5C |
|
|
|
Post by face0704 on May 30, 2020 19:36:25 GMT
guys I have problems with the app opening and closing banding from the remote control. does not work! in the machine in the settings the check appears but does not work how can I do ? do I have to activate something in manual coding? for golf 7 I read this: Select Central Electrics 09 Adaptation Access Control 2 comfort opening and set to active comfort closing and set to active funk komfort oeffnen and set to active funk komfort schilessen and set to active Menuesteuerung komfortbedienung einstellbar and set to adjustable Read more: forum.obdeleven.com/thread/1692/convenience-key-window-opening-closing#ixzz5XKPtEn5CIs it possible to add this coding to the skoda fabia? |
|
dmc
New Member
Posts: 1
|
Post by dmc on Oct 29, 2020 20:36:58 GMT
hi I have tried a number of these adaptations / encodings but they do not work on my 2016 skoda fabia. (for example: coming / leaving home, remotely controlling the windows with the key, etc.)
can you help me about it.
Thank you
|
|
|
|
Post by sergio8 on Feb 13, 2021 23:18:15 GMT
Hello everyone, I'm trying to active the coming home / leaving home function, after the procedure I can see the function on the infotainment, but it does not work. The light doesn't turn on.  Any idea how to solve it? Skoda fabia Montecarlo September 2016. Thanks |
|
|
|
Post by jamesg2571 on Feb 18, 2021 13:46:08 GMT
Coming home lights are not possible on standard NJ Fabia. Unless you have auto lights from factory (Light assist) dmc - You need full electric windows front and rear with one touch window operations for opening and closing windows with key fob. The modules to do this are in fact not within the car. So the modules have nothing to control. Sorry. |
|
|
|
Post by albibranca on May 25, 2021 9:16:55 GMT
Hello, anyone know how to activate the ESC Sport and ESC Off menu on Skoda Fabia 2020?
|
|
