|
Post by steve90 on Nov 19, 2022 14:36:22 GMT
Hi Just bought a 2019 VW Tiguan. I've plugged the old white dongle into the car and selected 3 adaptions via Apps. ( I have a Pro account as well). Although I got a message that each adaption was successful none of them seem to have taken and are working. Any ideas?
|
|
|
Post by steve90 on Nov 19, 2022 18:19:23 GMT
I've just gone into the long coding / adaptions and it shows that at least one of my 'one click' App selections (soft indicator increased form 3 to 5 'winks') has supposedly worked as it shows 5. However its still only doing 3
I tried to go into the long coding to get a 'sound' for locking and unlocking however the instructions listed here did not match what I had in the menu.
|
|
|
Post by ohiospyderman on Nov 20, 2022 14:18:39 GMT
Not sure if it's true for 2019 models, but in most of the newer models you have to have the hood open for "things" to actually change. It sort of puts the vehicle in diagnostic mode...
Bob.
|
|
|
Post by theblondefella on Nov 25, 2022 21:12:29 GMT
Don't need the bonnet open on a 2019 Managed to figure it out. I needed to reset the MMI for the adaptions to take
|
|
|
Post by petetong on Jan 9, 2023 14:37:50 GMT
Hello - i'm new to this - how to you reset the MMI?
I made some Tube adjustments on the dashboard - it changed colour once and I changed it back - but when I tried to change it again - it didnt apply although the app said it had applied correctly
|
|
|
Post by ryan7926 on Jan 12, 2023 19:40:15 GMT
Hold/push down the power button on the MIB for about 10-15 seconds. Unit will shut off, startup sequence should initialize, release power button and your changes should be activated.
|
|