Coding and adaptations

OBDeleven
Developer

Posts: 778

Coding and adaptations Feb 5, 2016 20:35:24 GMT blackvwb7 likes this

Quote

Post by OBDeleven on Feb 5, 2016 20:35:24 GMT

Comin Home/Leaving Home with Fog and LED
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 17
Bit2-Bit3 Activate.

Seat Belt Warning
Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 1
Bit 1 Deactivate

Window Closing with Remote Control
Select Control unit 46
Control unit Long Coding
Byte 6
Bit 6 Activate

Pointer Test
Select Control unit 17
Adaptation
Select Stagging
Value=Active

Rain Closing
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 9
Bit 1 Activate
Select Control unit 09 (Central Electrics)
Control unit Long Coding
RLS Sub Selection
Byte 0
Bit 2 Activate

Rain Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
RLS Subsystem
Byte 0
Bit 1 Activate

Sunroof Opening With Remote Control
Select Control unit 46
Control unit Long Coding
Byte 03
Bit 0 Activate
Bit 2 Deactivate
Select Control unit 4F
Control unit Long Coding
Byte 01
Bit 0 Deactivate

Activation of OPS
Select Control unit 10 (Assistance Situation)
Security access
Access Code 71679
Control unit Long Coding
Byte 0
Bit 4 Activate

DLR Only in Auto Mode
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 26
Bit 3 Activate

Headlight Wash Deactivation
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 20
Bit 5 Deactivate

LED Plate Bulb Error Deleting
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 23
Bit 6 Activate

Disabling ESP
Select Control unit 03
Control unit Long Coding
Byte 06
Change value from 00 to 80
Byte 14
Change value from 00 to 01

Deactivation of Beep Tone at Bluetooth Connection
Select Control unit 77 (Telephoe)
Adaptation
Bluetooth Acknowledge Signal
New Value:off

Closing Windows When Iglite Off
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 04
Bit 4 Deactivate
Bit 7 Activate

DLR on ODB
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 15
Bit 7 Activate

Lock Acknowlegde with Horn
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 5
Bit 1-Bit 4-Bit 7 Activate

XDS Activation
Select Control unit 03
Adaptation
Channel 67
New Value 1

Activation of Hill Hold Assist
Select Control unit 03
Control unit Long Coding
Byte 16
Bit 3 Activate

Hill Hold Assist Duration
Select Control unit 03 (Brakes)
Adaptation
Select Berganfahrassistent
Adjust as you wish. (default: Normal)

Cornering Fog Light Activation
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 7 Activate
Byte 12
Bit 4 Activate

OBDeleven | Professional diagnostic tool in your pocket

Daniel (Germany)
Senior Member

Touran

Posts: 361

Coding and adaptations Sept 21, 2016 8:19:22 GMT via mobile

Quote

Post by Daniel (Germany) on Sept 21, 2016 8:19:22 GMT

Coming-Home Modus automatisch:

(nur mit Licht-& Regensensor)

STG 09 -> Funktion 07 - Codierung -> Byte 12 -> Bit 2 (0= Modus automatisch / 1 = Manuell über Lenkstockschalter)

Coming-Home Modus (wann einschalten)

STG 09 -> Funktion 07 - Codierung -> BCM Steuergerät -> Byte 12 Bit 0 (0= Start mit KL 15 AUS/ 1 = Start mit Türöffnung)

CH/LH Leuchtdauer einstellen ohne MFA+:

STG 09 -> Funktion 10 - Anpassung -> BCM Steuergerät -> Kanal 23 (Zeitspanne Coming Home 0 --> 90 Sek.)

Für LH dasselbe nur Kanal 24 auswählen

cenata
New Member

Posts: 3

Coding and adaptations Nov 18, 2016 18:25:44 GMT via mobile

Quote

Post by cenata on Nov 18, 2016 18:25:44 GMT

For my car the Adaptation for "Pointer Test" (Needle sweep) did not work.
What made it work was this:

Pointer Test
Select Control unit 17
Adaptation
Select indicator_celebration
Value=Active

However, there is a possibility that the dashboard does not support it at all.
More information here

cenata
New Member

Posts: 3

Coding and adaptations Dec 3, 2016 15:32:27 GMT via Tapatalk

Quote

Post by cenata on Dec 3, 2016 15:32:27 GMT

Turn signal comfort count
(number of times the turn signal blinks when you just touch it)
Central Electrics 09
Adaptation
Channel 31
Enter value between 1 an 5 (default 3).
Click Save

I got it from here and it works.

In case it doesn't work after restart try this.

If you have a 2011+ Golf (maybe also Jetta or other 2011), this may not work as-is. In the MFI/MFD (instrument cluster menu), go to Settings-->Lights and vision--> Factory setting. At the prompt "Set to factory settings for lights & vision?", select OK. For some reason, it resets something and lets the adaptation work.

Daniel (Germany) Senior Member Touran Posts: 361	Coding and adaptations Dec 4, 2016 8:13:48 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Daniel (Germany) on Dec 4, 2016 8:13:48 GMT Pointer test did not work for every car. On my touran it did not work too. It only work with some instruments.

sandi New Member Posts: 1	Coding and adaptations Apr 15, 2018 19:12:31 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by sandi on Apr 15, 2018 19:12:31 GMT hyy how to turn activatin of rear halogen lights as daytime DRL activation touran2014coding
	Last Edit: Apr 15, 2018 19:17:30 GMT by sandi

rodaz New Member Greets! Posts: 31	Coding and adaptations Oct 9, 2018 4:41:40 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by rodaz on Oct 9, 2018 4:41:40 GMT Hello For my 2014 Touran: I want to activate CH/LH - I have no rain and light sensor (no problem if the light goes on even at daylight). Just the normal light-switch. Is this possible? More Important for me is Leaving home
	Audi A6 4G C7 Avant 3,0 Tdi quattro S-Tronic MY12

bianchi86 New Member Posts: 1	Coding and adaptations Nov 1, 2018 14:27:43 GMT via mobile siki73 likes this Quote Select Post Deselect Post Link to Post Back to Top Post by bianchi86 on Nov 1, 2018 14:27:43 GMT Hello I have tried to find an answer but didn't really find sonething. Can someone tell me if coding the mirrors that they fold in with long press lock button on key is now possible? Kind regards Dokinic

streetrod60 Closed beta tester Posts: 11	Coding and adaptations Jul 23, 2019 12:01:56 GMT via Tapatalk siki73 likes this Quote Select Post Deselect Post Link to Post Back to Top Post by streetrod60 on Jul 23, 2019 12:01:56 GMT How to enter RLS subsystem in Long coding for Rain Lights?

adiwob Senior Member Posts: 270	Coding and adaptations Jul 24, 2019 6:36:54 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by adiwob on Jul 24, 2019 6:36:54 GMT 09- Central Electrics -> Subsystem

fufa2011 New Member Posts: 1	Coding and adaptations Sept 5, 2019 11:59:37 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by fufa2011 on Sept 5, 2019 11:59:37 GMT Greetings gentlemen and ladies. Would there be some instructions for the idiot to document staging, or turning the tachometer hands when turning the key to the first position?
	Last Edit: Sept 5, 2019 12:06:49 GMT by fufa2011

adiwob Senior Member Posts: 270	Coding and adaptations Sept 5, 2019 13:09:32 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by adiwob on Sept 5, 2019 13:09:32 GMT Hello, what car do you have?

hba
New Member

Posts: 3

Coding and adaptations Jun 11, 2020 9:54:52 GMT

Quote

Post by hba on Jun 11, 2020 9:54:52 GMT

Nov 18, 2016 18:25:44 GMT cenata said:

For my car the Adaptation for "Pointer Test" (Needle sweep) did not work.
What made it work was this:

Pointer Test
Select Control unit 17
Adaptation
Select indicator_celebration
Value=Active

However, there is a possibility that the dashboard does not support it at all.
More information here

is there any other way to activate the needle sweep / indicator celebration?

I notice the needle sweep already active..

tries the staging and indicator_celebration but stated not supported..

any idea?

deady New Member Posts: 2	Coding and adaptations May 24, 2023 18:40:40 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by deady on May 24, 2023 18:40:40 GMT I am confused. When i go into stg Gateway to change start stop i dont have Adaptation. Only Long Adaptation. On what channel do i set the voltage?