|
|
Post by mitigating on Oct 31, 2022 19:36:28 GMT
Hey,
Is there a way to keep ambient lighting on all the time?
|
|
|
|
Post by mitigating on Dec 30, 2022 15:44:19 GMT
I've found the Leuchte for the ambient lights. 44 ALV C70. Function A is "Ambientelichtmodul Versogung" which translates to "Ambient light module supply". Function B is "aktiv100prozent" which translates to "Active 100%" (I assume 100% means all the time). Does anyone know what the differences between function A through F are? Based on another modification for the fog lights it seems like functions are the different use cases of module. If that's the case then why wouldn't "Active 100%" cause them to be on all the time?  |
|
|
|
Post by stefflimitless on Jan 9, 2023 21:40:46 GMT
Try to set Lichtfunktion to Klemme 30G
|
|
|
|
Post by mitigating on Jan 18, 2023 18:22:49 GMT
Nope
|
|
|
|
Post by stefflimitless on Jan 23, 2023 18:49:41 GMT
Add it on DEF?
|
|
|
|
Post by ballerkalle on Feb 28, 2023 21:40:35 GMT
Hi mitigating, did you get your ambient light to be on permanently?
|
|
|
|
Post by mitigating on Mar 15, 2023 3:35:11 GMT
Sorry for the late reply. It didn't work.
|
|
|
|
Post by dv52 (Australia) on Mar 15, 2023 5:01:09 GMT
I've found the Leuchte for the ambient lights. 44 ALV C70. Function A is "Ambientelichtmodul Versogung" which translates to "Ambient light module supply". Function B is "aktiv100prozent" which translates to "Active 100%" (I assume 100% means all the time). Does anyone know what the differences between function A through F are? Based on another modification for the fog lights it seems like functions are the different use cases of module. If that's the case then why wouldn't "Active 100%" cause them to be on all the time? mitigating : Hi. The "Leuchte programming" principles for MQB-evo platform cars (read mk8) have their genesis in MQB platform cars (read mk7/mk7.5). This said, there are some differences between the 2 x models which I have summarised in the table below:
So, notice that the primary difference is that the mk8 allows more "Lichtfunktion" channels (i.e. for each Leuchte-set, mk8 has 12 x Lichtfunkion channels and mk7/mk7.5 has 8 x Lichtfunkion channels)
I'm not really familiar with the new Leuchte-commands in a mk8, but my guess as to a possible answer to your question about Lichtfunkion A & B settings is that it means that the Leuchte-set ALV C70 (which controls pin#70 of Socket C on the central electrics module) controls a lamp(s) which must satisfy two conditions (meaning when the "Ambient light module supply" is active, the lamp will illuminate 100% of the time)!
As for your question about the general purpose of Lichtfunkion A, B, C.........L, the answer is that the alphabet value of a Lichtfunkion is used to resolve programming conflicts. On a mk8, it's possible to assign up to 12 x light-functions to a particular lamp. If a lamp is programmed to operate as more than one light-function (Lichtfunkion), it's quite probable for the respective light-functions to conflict occassionally.
As an example, suppose a Leuchte-set is programmed to turn-on a lamp when high-beam is selected on the light switch and also to turn-off when the turn-signal is operated. What happens when both conditions occur together?
The groupings that I show as Bank # in my table resolves the conflict in my example above. In Leuchte programming, the priority of a Leuchte command is determined by the Lichtfunkion alphabet value - like this A>B>C>D.........> L.
Don
|
|
|
|
Post by mitigating on Mar 20, 2023 2:12:23 GMT
So the issue with ambient lighting is that it's also controlled within the module?
|
|
wooop
New Member
Posts: 5
|
Post by wooop on Mar 24, 2023 7:50:25 GMT
I've found the Leuchte for the ambient lights. 44 ALV C70. Function A is "Ambientelichtmodul Versogung" which translates to "Ambient light module supply". Function B is "aktiv100prozent" which translates to "Active 100%" (I assume 100% means all the time). Does anyone know what the differences between function A through F are? Based on another modification for the fog lights it seems like functions are the different use cases of module. If that's the case then why wouldn't "Active 100%" cause them to be on all the time? mitigating : Hi. The "Leuchte programming" principles for MQB-evo platform cars (read mk8) have their genesis in MQB platform cars (read mk7/mk7.5). This said, there are some differences between the 2 x models which I have summarised in the table below:
So, notice that the primary difference is that the mk8 allows more "Lichtfunktion" channels (i.e. for each Leuchte-set, mk8 has 12 x Lichtfunkion channels and mk7/mk7.5 has 8 x Lichtfunkion channels)
I'm not really familiar with the new Leuchte-commands in a mk8, but my guess as to a possible answer to your question about Lichtfunkion A & B settings is that it means that the Leuchte-set ALV C70 (which controls pin#70 of Socket C on the central electrics module) controls a lamp(s) which must satisfy two conditions (meaning when the "Ambient light module supply" is active, the lamp will illuminate 100% of the time)!
As for your question about the general purpose of Lichtfunkion A, B, C.........L, the answer is that the alphabet value of a Lichtfunkion is used to resolve programming conflicts. On a mk8, it's possible to assign up to 12 x light-functions to a particular lamp. If a lamp is programmed to operate as more than one light-function (Lichtfunkion), it's quite probable for the respective light-functions to conflict occassionally.
As an example, suppose a Leuchte-set is programmed to turn-on a lamp when high-beam is selected on the light switch and also to turn-off when the turn-signal is operated. What happens when both conditions occur together?
The groupings that I show as Bank # in my table resolves the conflict in my example above. In Leuchte programming, the priority of a Leuchte command is determined by the Lichtfunkion alphabet value - like this A>B>C>D.........> L.
Don
Hi, I have a few questions for you, could you contact me in private message? |
|
|
|
Post by dv52 (Australia) on Mar 24, 2023 23:55:11 GMT
wooop: Hi. Hmm............ maybe read the request that I make on ALL my posts (it's repeated on the signature part of this reply!! Don't be shy, unless your questions are of a personal nature (if so, I really don't believe that I have an answer that is of value) - please ask in the forum proper!! Don
|
|
|
|
Post by krambert on Mar 29, 2023 0:20:06 GMT
This worked for my 2023 Tiguan R... However, it also disables the ability to dim the lights, so may not be suitable
Enable permanent Ambient lighting (during daylight as well as night time)
1. Module 09 Central Electrics
2. Security enter "31347"
3. Adaptation
4. Search "Interior Light Parameters"
5. Scroll through list until you find "p_helligkeit_Fzg_geschlossen_zuendung_ein_tueren" and select it
6. Change the value from 126 to "100"
7. Now scroll through the list until you find "p_helligkeit_Tueren_geschlossen_HD_zu_zuendung_aus_tueren"
8. Change the value from 96 to "100"
|
|
|
|
Post by ballerkalle on Apr 18, 2023 18:44:11 GMT
Didn't Work for ne, Security Code seems to be different in Golf MK 8 and there was no such function "Interior Light Parameters" on Stg 09.
|
|
