|
|
Post by filippotarsia on Oct 29, 2022 20:08:54 GMT
hi guys i have a friend with a gtd, i think that later the blind spot was mounted which never worked. I'll list the errors   |
|
|
|
Post by dv52 (Australia) on Oct 29, 2022 23:37:37 GMT
hmm......... not much information provided.
But based only on error description, are you sure that the module in your picture is actually installed on the right-side of the car and it's twin module is actually installed on the left-side ?
Don
|
|
|
|
Post by newty on Oct 30, 2022 6:54:22 GMT
The dataset is missing. That cannot work.
|
|
|
|
Post by filippotarsia on Oct 30, 2022 8:58:10 GMT
hmm......... not much information provided. But based only on error description, are you sure that the module in your picture is actually installed on the right-side of the car and it's twin module is actually installed on the left-side ? Don I don't know this, we'll try to remove the bumper and see what's behind it. then the 2 control units must match with the same code? |
|
|
|
Post by filippotarsia on Oct 30, 2022 10:01:18 GMT
hmm......... not much information provided. But based only on error description, are you sure that the module in your picture is actually installed on the right-side of the car and it's twin module is actually installed on the left-side ? Don here it is. these are the control units   |
|
|
|
Post by dv52 (Australia) on Oct 30, 2022 19:49:00 GMT
Which module is installed on the right side of the car? And, to newty point about the possibility of missing dataset, where did these modules come-from originally? Don |
|
