|
|
Post by collard on Oct 28, 2022 19:09:04 GMT
Would anyone who has an Enyaq Suite with heated seats be willing to share their VIN number on a PM?
It's to allow me to look up what the appropriate part number for the heated seat element for the leather seats is. I'm retro fitting to mine and the only source I can find for the heater elements has given me two part number options but can't tell me what the difference is.
Cheers
|
|
|
|
Post by collard on Nov 5, 2022 12:28:49 GMT
In case anyone else is walking the same path the part numbers for Enyaq heated leather OEM heating elements are: 5LA 963 555 D Front Bottom 5LA 963 557 E Front Back If you don't have leather seats the part number is: 5LA 963 555 E Front Bottom 5LA 963 557 F Front Back Either way you'll also need these two parts from Kufatec Seat Heating Harness for Seat, Skoda MQB2020, MEB www.kufatec.com/en/search?sSearch=46757Cable set seat heating - heating mats for MQB www.kufatec.com/en/search?sSearch=43362 |
|
|
|
Post by tigers on Nov 11, 2022 20:08:03 GMT
Can you tell me more on where to buy the seat parts?
|
|
|
|
Post by collard on Nov 14, 2022 9:53:54 GMT
skoda-parts.com, but I don't think they had it listed on the website, i emailed them at info@skoda-parts.com and they sorted it out for me. I've you're going to do the retrofit you'll also need to find the Air Conditioning Control Module in your car, this is where the wiring goes to. The Kufatec instructions were pretty light on detail, on mine it was the same as described in this page about the ID3 - evflux.pro/id3-interior/ . In addition one of the pins on the seat connector which was supposed to take the new wiring was already occupied. It was an earth, so I had to join the new wiring without using the connector for that pin. You'll also need a pair of good snips to cut the old hog rings to get the cover off and a pair of these to put new ones back on www.amazon.co.uk/gp/product/B07M86LX1S/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1Removing the seat cover was something like this Seat heater pads are self adhesive so simple enough to fit once you have the covers off. Coding wise you'll need to change the long coding in Module 3 Air Conditioning, find Front Heated seats and set to Active You'll also need to find "Seat Heating" in adaptions and set all the temperatures as per the table at the bottom of this thread. forum.obdeleven.com/thread/2517/heated-seats-heat-controlTook about 4 hours per seat but all working well now. G |
|
flopp
New Member
Posts: 3
|
Post by flopp on Dec 2, 2022 16:01:20 GMT
Anyone tried to retrofit seat heating for back seat?
|
|
|
|
Post by ship75 on Jul 18, 2023 10:42:54 GMT
hi, do you have any pictures of what the seat heater looks like. 5LA 963 555 D Front bottom
5LA 963 557 E front rear
|
|
