|
|
Post by OBDeleven on Feb 5, 2016 20:34:56 GMT
Cornering with Fog Lights
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 0
xxxxx00x in here, change 00 code to 11 . it will be xxxxx11x
Byte 4
Bit 0 activate
Activation of Off-Road Navigation
Car Menu:
Push Phone+Climate+Merkez Tuş+Nav+Traffic
In the hidden menu diagnostic>settings>offroad Navigation
Activate
Lock Acknowlegde with Horn
Select Control unit 46
Control unit Long Coding
Byte 1
Bit 2 Activate
Adaptation
Channel 63
Increase value 4
Pointer Test
Select Control unit 17 (Dashboard)
Control unit long coding
Byte 1
Bit 0 Activate
Trunk Opening with Remote Control
Select Control unit 6D
Access Code 12345
Adaptation
(4)-Activation using rear lid opening button in remote key-Tap function for closing
Valuer:Aktif
Trunk Opening
Select Control unit 6D
Access Code 12345
Adaptation
(4)-Activation using rear lid opening button in remote key-Tap function for closing
Value:Aktif
Folding Mirror
Select Control unit 52
Control unit long coding
Byte 4
Bit 6 Activate
Select Control unit 42
Control unit long coding
Byte 4
Bit 6 Activate
Select Control unit 46
Control unit long coding
Byte 7
Bit 7 Activate
|
|
|
|
Post by Ralph on Dec 1, 2016 9:51:34 GMT
How can I put Cornering with Fog Lights off Touareg 2013 4,2tdi
|
|
|
|
Post by Marcus on Oct 14, 2017 16:23:26 GMT
Suche für einen VW Touareg Zugriffscode Feststellbremse Steuergerät, fünfstellig um die Grundeinstellung vornehmen zu können
|
|
|
|
Post by Ricky on Nov 24, 2017 19:05:52 GMT
How do I code the transmOssian
|
|
|
|
Post by touareg86 on Jan 22, 2018 14:09:10 GMT
Hi everybody.i have a 2017 vw touareg after i connected obd eleven and activated engineering menu my compass is not working.only steering angle shows.how can i re activate compass pls help
|
|
|
|
Post by new2tregs on Jun 24, 2018 3:23:05 GMT
Hello everyone. I was wondering if anyone knows how to activate the Dynaudio feature? I don't see the radio (module 56) listed. I know the program that starts with a V will do it, but I decided to purchase the OBDEleven due to cost and the supposed ability of it to do the same as the "V" program. Thanks.
|
|
|
|
Post by hassannour37 on Jul 1, 2018 10:49:44 GMT
VIN: WVGZZZ7PZDD029820
Car: Volkswagen Touareg
Year: 2013
Body type: SUV
Engine: CRCA 180 kW (245 HP) 3 l
Mileage: 54559 KM
---------------------------------------------------------------
55 Headlight Regulation
System description: AFS-ECU
Software number: 7P6907357
Software version: 0110
Hardware number: 7L6907357C
Hardware version: H04
Serial number: --------------
ODX name: EV_HeadlRegulVWAFS
ODX version: 005006
Long coding: 010E00010F000200
Trouble codes:
C107E54 - Headlight No basic setting
static
|
|
|
|
Post by geltik on Sept 6, 2018 17:56:48 GMT
Does anyone successfully enable dynaudio in 7p treg with obdeleven? I tried a couple times but 56 Radio was always black and cannot access. Thanks!
VCDS:
1. Select the " 56 - Radio" unit.
2. Enter the section " 07 - Encoding " and press " Long encoding "
3. Byte 4 - replace the value 01 with the value 00
4. Save and exit
|
|
mamke
New Member
Posts: 6
|
Post by mamke on Dec 7, 2018 5:53:04 GMT
Turn signal 3x
Please help, after I use Obdeleven my turn signal working without "comfort mode". It won't more blinking 3x by itself when I gave turn signal. Now working only when I put switch to end. I hope that you understand me. I didn't use English for a while. Thank you
Touareg 7p
|
|
|
|
Post by rickturbo1956 on Feb 10, 2019 9:04:01 GMT
I have buy a Active display in a golf7 alltrack 2016 but hè wil not let ze car on contact
Entry in car is oke(keyles) but wen jou put on ze start button Nottingham happen in the display leeft bottom stand nocode key0/0
Wat kan i doe
|
|
|
|
Post by new2tregs on Jun 28, 2019 7:05:02 GMT
Has anyone figured out how to change the comfort blinks to something higher than 3?
|
|
|
|
Post by new2tregs on Jun 28, 2019 7:07:05 GMT
Does anyone have a list of channels for each control module and what that channel is/does?
|
|
|
|
Post by cosmin on Sept 25, 2019 11:15:31 GMT
VIN: WVGZZZ7PZDD029820 Car: Volkswagen Touareg Year: 2013 Body type: SUV Engine: CRCA 180 kW (245 HP) 3 l Mileage: 54559 KM --------------------------------------------------------------- 55 Headlight Regulation System description: AFS-ECU Software number: 7P6907357 Software version: 0110 Hardware number: 7L6907357C Hardware version: H04 Serial number: -------------- ODX name: EV_HeadlRegulVWAFS ODX version: 005006 Long coding: 010E00010F000200 Trouble codes: C107E54 - Headlight No basic setting static |
|
mamke
New Member
Posts: 6
|
Post by mamke on Oct 2, 2019 19:06:04 GMT
Does anyone successfully enable dynaudio in 7p treg with obdeleven? I tried a couple times but 56 Radio was always black and cannot access. Thanks! VCDS: 1. Select the " 56 - Radio" unit. 2. Enter the section " 07 - Encoding " and press " Long encoding " 3. Byte 4 - replace the value 01 with the value 00 4. Save and exit Hi, Obd eleven working with Module 56 from last week. Thank you OBD Eleven!!! |
|
|
|
Post by jetmanjo on Feb 3, 2020 20:32:43 GMT
Has anyone figured out how to change the comfort blinks to something higher than 3? I am new to OBDeleven and am trying to figure out how to adjust comfort turn signals to 5. They are currently at 3 on my 2014 Touareg TDI. I am actively searching for applications or other settings that can be changed but I am not finding much. Can anyone help guide me to a list of what the capabilities are for my vehicle? I also have a 2013 Jetta TDI and I have had good luck changing the comfort blinkers, needle sweep, and adjusting the way the doors lock once in motion. Thanks for help, I am hoping the answers are out there. |
|
|
|
Post by new2tregs on Jun 7, 2020 8:11:56 GMT
So far from every nook and cranny of the net I've searched it seems VW in their infinite wisdom has fixed the 3 blinks in the software with no ability to change it. oddly enough they re-enabled it on I believe 2017 and up.
|
|
|
|
Post by jacobsentertainment on Jul 16, 2020 9:47:27 GMT
Hi all,
Has someone already figured out the rainclose option, this would be a nice option to change.
|
|
|
|
Post by tallafar on Jan 2, 2021 18:15:50 GMT
Cornering with Fog Lights Select Control unit 09 (Central Electrics) Control unit Long Coding Byte 0 xxxxx00x in here, change 00 code to 11 . it will be xxxxx11x Byte 4 Bit 0 activate Activation of Off-Road Navigation Car Menu: Push Phone+Climate+Merkez Tuş+Nav+Traffic In the hidden menu diagnostic>settings>offroad Navigation Activate Lock Acknowlegde with Horn Select Control unit 46 Control unit Long Coding Byte 1 Bit 2 Activate Adaptation Channel 63 Increase value 4 Pointer Test Select Control unit 17 (Dashboard) Control unit long coding Byte 1 Bit 0 Activate Trunk Opening with Remote Control Select Control unit 6D Access Code 12345 Adaptation (4)-Activation using rear lid opening button in remote key-Tap function for closing Valuer:Aktif Trunk Opening Select Control unit 6D Access Code 12345 Adaptation (4)-Activation using rear lid opening button in remote key-Tap function for closing Value:Aktif Folding Mirror Select Control unit 52 Control unit long coding Byte 4 Bit 6 Activate Select Control unit 42 Control unit long coding Byte 4 Bit 6 Activate Select Control unit 46 Control unit long coding Byte 7 Bit 7 Activate Security code 12345 iş not working. Is there any other code for trunck opning and lukning |
|
|
|
Post by olli2011 on May 17, 2021 16:00:10 GMT
Hello, I am also looking for the possibility to do the basic setting of my parking brake.
After changing the lining, the error "Motor parking brake, clamping force too low" always occurs
When selecting in the OBD menu, an entry is required after clicking on the basic setting. There it says "00-FF".
Can someone do something with that?
|
|
