|
Post by mcquaim on Oct 19, 2022 13:41:01 GMT
Hi guys,
I'm looking a bit of advice here before buying the ODB 11 device.
I just recently installed a reverse camera and front and rear parking sensors into a MK7 Golf.
I got both off Ali Express and looks to be programmed for a LHD Golf as the image on the stereo is the opposite, what is on the left of the car shows up on the right of the stereo.
I contacted the seller and he said I need to set the Park Assist module to RHD. I have VCDS but there is no option for setting this on module 10. He then suggested using ODIS which I don't have either.
I'm wondering if ODB 11 would show this parameter, anyone got it to check before I buy?
It must be a parameter if both the camera and radar both show the opposite...
Cheers, Mac
|
|
|
Post by newty on Oct 19, 2022 15:10:51 GMT
This should be somewhere in 5F, which handles all images.
8 Channel PDC is unaware of the steering or driving side, only 12 channel Park/Steer assist are having this option.
|
|
|
Post by mcquaim on Oct 19, 2022 17:52:27 GMT
Hi there,
Thanks for the reply.
I managed to sort it and it was indeed module 5F. The car model was set incorrectly, changed it to 5G and all now good.
Thanks, Mac
|
|
|
Post by jonl6280 on Mar 12, 2024 21:25:58 GMT
Hi, I think I have the same issue with my rear camera I fitted to my mk8 Golf, I'm sure the camera is loaded as a LHD because image from the camera in my screen leaves a gap and the parking sensors are in correct side but it covers part of the camera image, so if the parking sensor image was on the other side like a LHD car it would be perfect.
How did you sort your issues?
Thanks
|
|