Post by jomonk on Oct 19, 2022 9:55:02 GMT
Hi all ,
I am listing down the lamp channels that i have tested/tweaked in VW Taigun
* Reversing Lights == Leuchte28RFL C3
Default Lamp is P21W filament bulbs, but can be changed to LED bulbs.
User has to change the below adaptation , so that no faults/error comes in dashboard after changing to LEDs
Central Electrics(09) > Adaptation > Leuchte28RFL C3 > Type_of_Load_28 > allgemeine_LED_6W
FOG LIGHTS - By default each Lamp is H8 type, 35watts filament bulb, but can be changed to LED bulbs.
User has to change the below adaptation , so that no faults/error comes in dashboard after changing to LEDs
* Front Left Fog Light == Leuchte12NL LB40
Central Electrics(09) > Adaptation > Leuchte12NL LB40 > Type_of_Load_12 > LED_Lichtmodul
* Front Right Fog Light == Leuchte13NL RB3
Central Electrics(09) > Adaptation > Leuchte13NL RB3 > Type_of_Load_13 > LED_Lichtmodul
:: In all cases , Access Code if asked by obdeleven use 31347
The above adaptation is not required if CAN-bus error free LEDs are used.
I am listing down the lamp channels that i have tested/tweaked in VW Taigun
* Reversing Lights == Leuchte28RFL C3
Default Lamp is P21W filament bulbs, but can be changed to LED bulbs.
User has to change the below adaptation , so that no faults/error comes in dashboard after changing to LEDs
Central Electrics(09) > Adaptation > Leuchte28RFL C3 > Type_of_Load_28 > allgemeine_LED_6W
FOG LIGHTS - By default each Lamp is H8 type, 35watts filament bulb, but can be changed to LED bulbs.
User has to change the below adaptation , so that no faults/error comes in dashboard after changing to LEDs
* Front Left Fog Light == Leuchte12NL LB40
Central Electrics(09) > Adaptation > Leuchte12NL LB40 > Type_of_Load_12 > LED_Lichtmodul
* Front Right Fog Light == Leuchte13NL RB3
Central Electrics(09) > Adaptation > Leuchte13NL RB3 > Type_of_Load_13 > LED_Lichtmodul
:: In all cases , Access Code if asked by obdeleven use 31347
The above adaptation is not required if CAN-bus error free LEDs are used.
