|
Post by icemanswe on Oct 11, 2022 8:08:09 GMT
For info: I have no fault on my BMW G31 2020, 520d Xdrive and I have used different tools on my 3 BMW and Audis for the last 10-15 years so I know what to do and not to do! I checked my car yesterday with the Bimmerlink and no faults but….
When I tried your app it trigged a fault in my dashboard and it also came to my mobile phone with the same fault! It took BMW service 10-15 min before the called me to arrange a service since it has trigged a fault on there side as well!
The fault that came up was:
Limited braking system!
Long story short. I have no problem with the braking system and no tools says I have a problem not even Obdeleven report any problem!
I really think that you should look up on this because I don’t want to use a software/hardware to triggering telephone calls from BMW!!
|
|
|
Post by OBDeleven on Oct 11, 2022 8:12:41 GMT
First of all, Bimmerlink does not have a scan, so it will not trigger any fault.
Second, you may see some lights on your dashboard, or multimedia during the scan process, it is completely normal, but once the scan is done, you will not have any faults on the control unit.
|
|
|
Post by icemanswe on Oct 11, 2022 13:56:03 GMT
Well I can give you and all people my photos and timestamps from both my telephone call from BMW Service and my BMW app where the fault came up. You are right that nothing is stored in my car now since it hasn’t that fault but you CAN’T say that your dongle/software didn’t create this happening! I really liked what I can use your product on my Audi but now when I see this I have to make my voice heard, prove me wrong but just don’t ignore this because it’s not good for your business !!
|
|