|
Post by filippotarsia on Oct 10, 2022 17:07:54 GMT
hi has everyone. I have a golf 7 Gtd 2015. I get to the point it was fitted with the rain sensor with the final letter A, I replaced it with a sensor without a letter to have the automatic closing of the windows (applied with gel). everything works, but I realized that 3 days have passed and the sensor is no longer good, if it rains it starts late but no longer cleans the glass with the speed it used to be or worse it does not clean at all. in OBDeleven it makes me get error B136676 sporadically. now what can i do ... can the rain sensor be calibrated? or I have to put back its original with final A.
|
|
|
Post by dv52 (Australia) on Oct 10, 2022 21:18:12 GMT
@filippotaraia: hmm........ the error message suggests incorrect position (it's an intermittent fault) - so the problem doesn't seem to be one of calibration (AFAIK, these sensor can't be calibrated with OBD11).
If this was my car- I would be checking the condition of the gel pad and how the sensor is seated/secured
Don
|
|
|
Post by filippotarsia on Oct 10, 2022 23:15:16 GMT
|
|