|
Post by sammk2 on Oct 10, 2022 8:00:11 GMT
Hi there, I’ve got an OBD11 pro account and was wondering what other mods everyone has done to their mk8 Golf.
So far I’ve done the power, torque, g meter on the dash along with dual maps and IQ presentation mode.
Are there any other mods anyone can recommend. ? I have the R Line 1.5 eTSI and was also wondering if there was a way to see the mild hybrid 48V battery charge state on the infotainment or AIB?
|
|
alexf
New Member
Posts: 8
|
Post by alexf on Oct 10, 2022 14:10:47 GMT
Hi sammk2, can you tell me how did you managed to activate the IQ presentation mode?
For now, the only change I have done on mine is some new views in my cluster instrument.
Alex.
|
|
|
Post by sammk2 on Oct 10, 2022 14:42:43 GMT
Hi, I found this on another thread and managed to get mine working by following this.
Select Control Unit 4B. Do an SFD unlock. Following setting are all adaptions. Switch on: Presentation mode Presentation run dynamic AFS light (this will tilt the headlights up and down) Reference run run activation effect (this will switch on all high beam segments in wave)
Set reference run start condition to Motor start (or similar). Ignition can cause problems. Order reference run activation effect - unsure, please test it. Ideally, it should ignite the matrix segments while the afs has the lights at the lowest point.
In the end: Relock SFD, clear faults. (Or just be bland like me and let SFD time out)
|
|
|
Post by newty on Oct 10, 2022 17:53:41 GMT
Presentation mode is not needed i pointed out later A quote ot some credit would have been nice :-)
|
|
|
Post by mrbyte on Oct 10, 2022 20:10:00 GMT
Hi there, I’ve got an OBD11 pro account and was wondering what other mods everyone has done to their mk8 Golf. So far I’ve done the power, torque, g meter on the dash along with dual maps and IQ presentation mode. Are there any other mods anyone can recommend. ? I have the R Line 1.5 eTSI and was also wondering if there was a way to see the mild hybrid 48V battery charge state on the infotainment or AIB? I also have a Golf 8 eTSI 1.5 and would like to make some changes. Can you help me tell me where I find the codes to activate the various functions via OBDeleven?
|
|