|
|
Post by locodiablo on Oct 4, 2022 12:22:01 GMT
Hi everything activated have memory in mirror just need to set x y position of mirror on a manual 2013 2.0 TDI so it dips to position I want then return to normal only seen vids for auto cars an doesn't work
Tthanks in advance
|
|
|
|
Post by dv52 (Australia) on Oct 4, 2022 20:22:32 GMT
It's not difficult - it's ALL described in your owner's manual - like this:
Storing front passenger exterior mirror settings for reversing with mirror-dip
- Select a valid vehicle key for saving the settings.
- Unlock the vehicle using this key.
- Switch on the electronic parking brake.
- Switch on the ignition.
- Put the gearbox into neutral.
- Activate the reverse gear exterior mirror lowering function using the CAR button and the
 and Mirrors and wipers function buttons in the infotainment system. - Select reverse gear.
- Adjust the exterior mirror on the front passenger side so that you have a good view of the kerb area.
The settings for the mirror position will be saved automatically and assigned to the vehicle key that is used to unlock the vehicle.
Don
|
|
|
|
Post by locodiablo on Oct 5, 2022 17:04:34 GMT
There is no Mirrors and wipers function buttons in the infotainment system
|
|
|
|
Post by dv52 (Australia) on Oct 5, 2022 19:34:06 GMT
oops.......my bad - I described the VW method for mirror tilt . The Audi method is the same - but without the step VI (mirror tilt is activated via the long-code and there is no ability to switch it in the infotainment unit)
it's basically like this in an Audi
Note: the instructions in the video say to select the left side with the mirror knob. This is correct if the passenger side is on the left side. If the car has left-hand drive, the passenger side is on the right. The general rule is to turn the mirror knob to the passenger-side
Don
|
|
|
|
Post by locodiablo on Oct 6, 2022 15:11:05 GMT
Hi thanks for the help have seen this video doesn't work I have a manual car
|
|
