|
Post by papayatt on Sept 27, 2022 13:08:09 GMT
there should be a coding with which you can open a valve so that not only the interior is warmed up, but also the engine. does anyone know this code?
|
|
prspr
New Member
Posts: 12
|
Post by prspr on Sept 27, 2022 14:22:07 GMT
Hi,
Try going to Parking Heater -> Long Coding Then change 'Coolant change-over valve' from 'installed' to 'not installed' (or you can change Byte 0, Bit 3 from 1 to 0 which will be the same)
|
|
|
Post by papayatt on Sept 28, 2022 10:24:33 GMT
Thank you, I applied the coding. but couldn't test it. I will report if the coding has brought the desired success.
|
|
|
Post by papayatt on Sept 30, 2022 11:19:12 GMT
It worked
|
|
prspr
New Member
Posts: 12
|
Post by prspr on Oct 1, 2022 8:27:29 GMT
Glad to hear that
|
|