|
|
Post by chriz1 on Sept 15, 2022 19:32:16 GMT
Does anyone know how to adjust the Iq matrix headlight dipped beam ?
Is it manaual or can it be done with obdeleven. I've had a new passenger headlight and they didn't adjust the beam
|
|
|
|
Post by newty on Sept 18, 2022 8:46:18 GMT
I have documented the procedure several times.
There are adjustment screws for the dipped beam, openly turnable with common tools. I do not encourage to adjust them from the empty hand without any equipment. Correct procedure is:
*Start basic setting
*Adjust headlight as usual in workshop
*End basic settings (This hardware setting is now linked with the signal of the load sensors on the axles, this way, dynamic headlight adjustment can adjust the height)
*Start matrix basic settings
*Start measurement on matrix capable adjustment device
*End matrix basic settings, entering the values from said unit
->Done.
|
|
|
|
Post by chriz1 on Sept 22, 2022 17:38:19 GMT
Ok thanks back to dealer then
|
|
