|
Post by darrenkellum on Sept 1, 2022 18:53:18 GMT
I am retrofitting the electric tailgate motors. After coding the comfort controller to add the tailgate module and lock, the 6D controller is showing in my list now with a Yellow dot and my Gateway 19 is showing a fault that it's incorrectly coded. If this was vcds I'd need to add the new controller in the gateway list. How can I do this on obdeleven?
I can open and close the tailgate using the output tests on the 6D but the tailgate button on the lid does not function. Help appreciated
|
|
|
Post by darrenkellum on Sept 1, 2022 20:37:57 GMT
Just worked this out. Press the pencil button at the bottom right of the controller modules screen. That loads up the list of modules you can select. Added the 6D. Error now disappeared.
|
|