ivars
New Member
Posts: 7
|
Post by ivars on Aug 31, 2022 23:50:01 GMT
I have made many changes to the car. I activated six applications which worked well. The automatic closing of windows when locked did not work for some reason. The bigger concern is that I made a few changes with long coding, as a result of which front assist and lane assist no longer work. The car and the app both show an error code. I forgot to make a backup. Is there any way to get the correct settings from somewhere?? I am in trouble.
Skoda Kamiq CNG MonteCarlo
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Sept 2, 2022 12:58:06 GMT
Changes that you have done through long coding and adaptations will be stored on history, if the errors come from the apps try to diactivate the apps ,althought that's not sure that will work.
Next time use only long coding and adaptations that are saved on history, the apps do not show what changes have been done. In worst case senario go to your dealer and ask to restore - update the units that have the errors.
|
|
ivars
New Member
Posts: 7
|
Post by ivars on Sept 6, 2022 14:51:03 GMT
Hi, thanks for the good answer!  I have adjusted "Driver Assistance" in the menu and then "Basic Settings". From there I pressed something, after which the error codes came. So it was probably not about the LongCod section after all. Those BasicSetting changes don't seem to be visible in the history, so I can't change them anymore..? Another problem is the adaptive cruise control. The car does not have such a feature, so I tried to activate the feature from the application. However, activation did not bring adaptive cruise control. I disabled the feature, but the car still shows an error code that the adaptive cruise control is not working, even though it is no longer in use. Do I have to delete it somehow, otherwise the error code disappears? |
|
ivars
New Member
Posts: 7
|
Post by ivars on Sept 7, 2022 17:58:02 GMT
Okay, I'll try that. How about removing that adaptive cruise control from the error code?
|
|
|
|
Post by stefflimitless on Sept 7, 2022 21:20:46 GMT
I just read, you don’t have ACC from factory. Means that you can’t have Front assist either. Because it is the same radar. And i think you don’t have a unit 13 showing on your obd11 app.
First you can try disable ACC in 5F.
Adaptations—>Vehicle Function List Bap—>ACC 0x05–>not activated
Adaptations—>Vehicle Menu Operation—>Menu Display ACC—>not activated
Adaptations—>Vehicle Menu Operation—>Menu Display ACC over threshold high—>not activated
Unit 19: Adaptations—>Installation List, specified installations—>Adaptive Cruise Control—>not coded
Unit17: Long Coding—>Automatic Distance Regulation—>No
|
|
ivars
New Member
Posts: 7
|
Post by ivars on Sept 8, 2022 12:23:29 GMT
Hey, I think you're right about the radar. When I got the car, it had front assist and lane assist, both of which worked perfectly (tried). However, there is no adaptive cruise control. "(The models SCALA and KAMIQ are equipped as standard with the latest assistance systems, such as lane assist and Front Assist, which monitors the area ahead with radar, which includes city driving emergency braking assistance.)" But as you said, front assist works on the same radar as ACC, but lane assist works instead with a camera that is on the windshield behind the mirror. That camera is also here. In principle, I could activate the adaptive cruise control in this car, but I don't know how to do it correctly with this application. Now it shows as an error code..
|
|
ivars
New Member
Posts: 7
|
Post by ivars on Sept 8, 2022 13:18:05 GMT
OBDeleven data log
Date: 2022-09-08 16:16
VIN: TMBGH7NW9L3082231
Car: Skoda Kamiq
Year: 2020
Body type: SUV
Engine: DBYA 66 kW (90 HP) 1.0 l
Mileage: 35601 KM
---------------------------------------------------------------
13 Adaptive Cruise Control
System description: ACCCONTIMQB
Software number: 2Q0907572R
Software version: 0372
Hardware number: 2Q0907572B
Hardware version: H03
ODX name: EV_ACCMRRCONTIVW376
ODX version: 003016
Long coding: 2A04600100FF8748949C810500508700000000000000000004
Trouble codes:
C110B54 - Adaptive cruise control sensor No basic setting
static
Date: 2022-09-01 16:01:07
Mileage: 34981 km
Priority: 4
Malfunction frequency counter: 1
Unlearning counter: 83
Dynamic environmental data: 028593028D58101116ED10120800102E06
C110300 - Adaptive cruise control sensor misadjusted
static
Date: 2022-09-01 16:01:07
Mileage: 34981 km
Priority: 4
Malfunction frequency counter: 1
Unlearning counter: 83
Dynamic environmental data: 028593028D58101116ED10120800102E06
C110300 - Adaptive cruise control sensor misadjusted
static
Date: 2022-09-01 16:01:07
Mileage: 34981 km
Priority: 4
Malfunction frequency counter: 1
Unlearning counter: 83
Dynamic environmental data: 028593028D58101116ED10120800102E06
|
|
ivars
New Member
Posts: 7
|
Post by ivars on Sept 8, 2022 13:19:17 GMT
OBDeleven data log
Date: 2022-09-08 16:16
VIN: TMBGH7NW9L3082231 Car: Skoda Kamiq Year: 2020 Body type: SUV Engine: DBYA 66 kW (90 HP) 1.0 l Mileage: 35601 KM
--------------------------------------------------------------- A5 Driver Assistance
System description: MQB_B_MFK Software number: 3Q0980654R Software version: 0460 Hardware number: 3Q0980654A Hardware version: H12 Serial number: 18121915P11353 ODX name: EV_MFKBoschMQBB ODX version: 002041 Long coding: 0202070600000401012200448156440084000E20002000
Trouble codes: B201000 - No basic setting static Date: 2022-09-01 16:01:12 Mileage: 34981 km Priority: 4 Malfunction frequency counter: 51 Unlearning counter: 104 Control module temperature: 32 °C Vehicle speed: 88.14 km/h Voltage terminal 15: 14.6 V Outside air temperature: 15.5 °C System run time: 1123.6 s Status of camera: operational Engine_Running_Info: 1 MID: 001E Software_Info_1: 0 Software_Info_2: 4 Software_Info_3: 6 Software_Info_4: 0 C110500 - Vehicle Identification Number (VIN) Implausible Intermittent Date: 2022-09-04 04:07:13 Mileage: 35360 km Priority: 4 Malfunction frequency counter: 2 Unlearning counter: 138 Control module temperature: 28 °C Vehicle speed: 0.00 km/h Voltage terminal 15: 12.0 V Outside air temperature: 19.0 °C System run time: 2.9 s Status of camera: operational Engine_Running_Info: 1 MID: 0052 Software_Info_1: 0 Software_Info_2: 4 Software_Info_3: 6 Software_Info_4: 0
|
|
|
|
Post by stefflimitless on Sept 8, 2022 15:12:25 GMT
So do you have a unit 13 in obd11? And is there a radar installed in the grill? Open bonnet and check.
And no basic settings, means in worst case there is no Dataset in A5
To get more information you need anyone who is familiar with ODIS.
Have you tried Online calibration for A5?
Btw the software you have is out of date. The latest was 0980.
Anyway, which apps you used to trying unlock Assistance features? Name or screenshot would be nice.
I cannot compare with my Scala long coding because I have the pACC coded, and on quick view nearly everything is different to yours.
|
|
|
|
Post by stefflimitless on Sept 8, 2022 15:32:04 GMT
The radar should look like this  |
|
|
|
Post by stefflimitless on Sept 8, 2022 15:32:45 GMT
And unit 13  |
|
|
|
Post by stefflimitless on Sept 8, 2022 15:47:23 GMT
|
|
|
|
Post by stefflimitless on Sept 8, 2022 15:53:36 GMT
here some Adaptations and Long Codings for A5 I think more I cannot help and you search for any ODIS guy    |
|
|
|
Post by stefflimitless on Sept 8, 2022 15:56:14 GMT
After you coded reset the System, bus sleep. When the failure still persists, recalibrate the Radar like I told you. then both Failures should be gone
|
|
I have adjusted "Driver Assistance" in the menu and then "Basic Settings". From there I pressed something, after which the error codes came. So it was probably not about the LongCod section after all. Those BasicSetting changes don't seem to be visible in the history, so I can't change them anymore..? Another problem is the adaptive cruise control. The car does not have such a feature, so I tried to activate the feature from the application. However, activation did not bring adaptive cruise control. I disabled the feature, but the car still shows an error code that the adaptive cruise control is not working, even though it is no longer in use. Do I have to delete it somehow, otherwise the error code disappears?
