mirq
New Member
Posts: 6
|
Post by mirq on Aug 29, 2022 17:34:36 GMT
Hi,
I have Audi A3 8V MY16. I tried OBDELEVEN scandian drl app. (To have my taillights off when on DRL. The app didnt work with my car. (When im running on auto or ”0” position, the taillights are on with DRL.
Someone suggest some ideas? Im running with IOS software if its essential. Thanks!
|
|
|
|
Post by dv52 (Australia) on Aug 29, 2022 21:28:41 GMT
mirq : I assume that you have a PRO account. There are a number of ways that the tails might be programmed to operate as DRLs - but fundamental method for enabling Scandinavian DRLs is to enable the adaptation channel in the central electrics module: - Außenlicht_Front-Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht
So - first try would be to check the value of the channel above and set it to not active if it's not already that value
If you don't need to change the value above - then it gets a bit more tricky! Again in the central electrics module (adaptation), look through the channels for the Leuchte-sets listed below that have the name Lichtfunktion for the Leuchte-command Tagfahrlicht and change the value to nicht aktiv. There will be 8 x Lichtfunktion channels in each Leuchte-set and there should be only one instance of the Leuchte-command in each Leuchte-set
- Leuchte23SL HLC10
- Leuchte24SL HRA65
- Leuchte20BR LA71
- Leuchte21BR RC8
Don
|
|
mirq
New Member
Posts: 6
|
Post by mirq on Aug 30, 2022 3:39:32 GMT
”adaptation channel in the central electrics module: Außenlicht_Front-Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht” I cant find that named channel in central electronics. But what i have found: central electrics-adaptation-Daytime running light: I try to put picture here. Heres link to the picture: aijaa.com/XY8UWGAnd heres the other pic: aijaa.com/fuMQwh |
|
|
|
Post by dv52 (Australia) on Aug 30, 2022 22:02:09 GMT
mirq : OK - I assumed that your car had the newer type central electrics module. But it seems that this car has the older version module (the module with an active long-code string)!
It doesn't matter - the first channel on your first picture is the equivalent channel for Scandinavian DRLs on your module and its value is not active. So it seems that the Leuchte-sets on your tail-lights have been changed to enable the DRLs.
Try the second part of my suggestion
Don
|
|
mirq
New Member
Posts: 6
|
Post by mirq on Aug 31, 2022 5:22:20 GMT
Thanks! I found 1 leuche set where are Tagfahrlicht. Its in Leuche23SL HLC10 -LICHTFUNKTION E23. There is ”tagfahrlicht” and options list is long. Here is picture: aijaa.com/30XNfcShould i put here nich aktiv? |
|
|
|
Post by dv52 (Australia) on Aug 31, 2022 21:24:51 GMT
mirq : short answer to your question is YES, change Leuche23SL HLC10 -LICHTFUNKTION E23 to nicht aktiv.
Longer answer is - I'm surprised that you only found Tagfahrlicht in ONE Leuchte-set! You said in your first post that "the taillights are on with DRL". "Taillights" is plural - suggesting that more than ONE lamp on the taillights operates as DRL. Are you sure?
Don
|
|
mirq
New Member
Posts: 6
|
Post by mirq on Sept 1, 2022 5:45:17 GMT
I dont know how to spell taillights in english..
In taillights on drl i mean the same lights on cars back that is on all the time.
Same car backlights is on all the time. (4 LED backlights, 2 on one side.) all the time when my engine is running. Should i put a picture of the taillights?
|
|
|
|
Post by dv52 (Australia) on Sept 1, 2022 22:31:37 GMT
It can vary, but Leuche23SL HLC10 is normally the inside tail light on the left side. Make the change that I've already suggested and if the problem isn't solved, post-up a picture of the tail lights showing DRL
Don
|
|
mirq
New Member
Posts: 6
|
Post by mirq on Sept 2, 2022 14:09:29 GMT
I succeeded in this!
It was in two places:
Leuchte 23sl hlc10 - lichtfunktion e23
And leuchte 24sl hra65 - lichfunktion e24.
I changes those two to ”nicht aktiv” and now all is fine!
thanks for the really good advice don!
|
|
