|
Post by dominador on May 5, 2017 15:42:04 GMT
Hi Folks, I am new to the OBDeleven and trying to translate coding in VCDS to the OBDeleven interface. Can someone help provide instructions for coding the following in OBDeleven?
Gauge sweep
17 Instrument
Coding -> Function 10
Byte 1
Enable bit 0
|
|
|
Post by Daniel (Germany) on May 5, 2017 21:15:51 GMT
I dont understand your question. Go to control unit (stg) 17, choose coding, go to byte 1, enable bit 0 If you look when obd eleven is connected to your car it would be self explanatory.
|
|