|
Post by bamoulay on Aug 25, 2022 23:40:31 GMT
It is possible to activate dynamic light assist per default without using the lever ?
|
|
|
Post by dv52 (Australia) on Aug 25, 2022 23:50:55 GMT
My tweak suggestion below will NOT activate High-Beam-Assist (HBA) as default - but the car should remember the status of HBA from the previous ignition.
So with my tweak, if you activate HBA - it should remain activated on subsequent ignition cycles until you deactivate the facility!!
If this is acceptable - try this: - Go to central electrics module
- Select Adaptation
- Search for "Fernlicht" and select Fernlicht_assistent
- Navigate to Fernlichtassistent Reset and select. Change value to not active
- If you are asked for a security code - choose 31347
Don
|
|
|
Post by bentuptouareg on Aug 29, 2022 7:01:07 GMT
Thanks dv52, nice mod I'll try it out.
Now I just need to play around with enabling area view to come on when slow with front sensor activation.
Thanks again.
2022 Touareg CR 210TDI Elegance
Roof and Sound package
|
|
|
Post by bentuptouareg on Aug 30, 2022 3:18:25 GMT
Howdy,
Tried that, didn't seem to have High Beam assist (Fernlicht_assistent)in that module, any other ideas?.
Thanks
2022 Touareg CR 210TDI Elegance
Roof and Sound package
|
|
|
Post by bamoulay on Sept 1, 2022 16:53:29 GMT
My tweak suggestion below will NOT activate High-Beam-Assist (HBA) as default - but the car should remember the status of HBA from the previous ignition.
So with my tweak, if you activate HBA - it should remain activated on subsequent ignition cycles until you deactivate the facility!!
If this is acceptable - try this: - Go to central electrics module
- Select Adaptation
- Search for "Fernlicht" and select Fernlicht_assistent
- Navigate to Fernlichtassistent Reset and select. Change value to not active
- If you are asked for a security code - choose 31347
Don
I don't find "fernlicht", what can I do ?
|
|
|
Post by dv52 (Australia) on Sept 1, 2022 22:52:48 GMT
bamoulay : I really haven't tried my tweak suggestion on an actual Mk3 (CRU) vehicle. Before posting my reply, I confirmed that this model car is built on a MQB platform and I have suggested tweak instructions that apply to other MQB platform models (like Audi A3 8V and Golf mk7/mk7.5). It could be that the adaptation channel database on the central electrics module for a Mk3 (CRU) is configured differently (I don't know). If you post-up a back-up of the module - I can take a look at how it is configured. If you aren't aware of how to create a back-up file using OBD11, check-out YouTube videos Don
|
|
|
Post by bentuptouareg on Sept 5, 2022 22:27:12 GMT
Will do thanks dv52.
|
|
|
Post by atomant on Jun 27, 2023 12:35:49 GMT
Hi Did you manage to achieve - "enabling area view to come on when slow with front sensor activation" Thanks dv52, nice mod I'll try it out. Now I just need to play around with enabling area view to come on when slow with front sensor activation. Thanks again. 2022 Touareg CR 210TDI Elegance Roof and Sound package Howdy, Tried that, didn't seem to have High Beam assist (Fernlicht_assistent)in that module, any other ideas?. Thanks 2022 Touareg CR 210TDI Elegance Roof and Sound package
|
|