|
Post by suiteautumn on Aug 16, 2022 17:44:42 GMT
Good afternoon guys, I am having a bit of trouble coding my footwell lights. I have them swapped over for RGB LED lights that I keep dimly lit, and I think it would be interesting to have them blink with the turn signals. I did some tinkering in the app, and I managed to get them to blink, but the only way I got it to work was both footwells blinking with either direction. Ideally, I want the driver footwell to blink with the left turn signal, and vice versa with the right. Is this possible? Has anyone found a way to do anything similar? I will attach a screenshot of what I have set up so far. Any help would be appreciated! Thank you!
|
|
|
Post by vwjap on Aug 16, 2022 19:58:42 GMT
I think the footwell are controlled by 1 set, whereas all the other indicators have a set each, so not sure that would be possible
|
|
|
Post by dv52 (Australia) on Aug 17, 2022 0:37:57 GMT
Not sure about your particular car - but some time ago, I was asked by a hearing impaired friend to help her find a way to be more aware of the turn-signal function on her mk7 Golf (she couldn't hear the "blinking" sound from the dashboard when the turn-signal was activated). Anyhow, my solution was to program the footwell lighting to "blink" whenever the turn-signal was engaged (ether side). Of course my answer didn't help on bright sunny days - but it did work (of a fashion) when daylight conditions were low and it was very successful after dark! So, again I'm not sure how close my solution suits your wants - but I posted details on my local forum HERE. As you will see, my instructions are for VCDS, but the procedure for OBD11 is very similar!
Don
|
|
|
Post by suiteautumn on Aug 17, 2022 10:55:26 GMT
dv52 (Australia) Thank you for the reply! I took a look through the link you sent and will give that a try next time I am out at my car. Looks like I may just have to live with both at once.
|
|