Post by ashok on Aug 2, 2022 8:16:36 GMT
hi. i have vw golf 6 variant 2010-2011 with CFHC 2.0 tdi engine and my dpf pressure sensor part number is "059 906 051 C"
RECENTLY i got error P245200 dpf pressure sensor "A: circuit
and i replaced with exact part with same number
now the error is gone
but i read that g450 dpf pressure sensor should be adapted with coding II or in UDS protocol
but i didnt had this coding II avilable in engine control unit and i had go with uds protocol
and it was without any luck
and i was trying to do the adaptation in obdeleven with uds protocol but nothings happenng
except glow plug light is flashing and the basic setting says that adapation ended as soon as i click the start button
and after 3 or 4 min the obdeleven dissonnects and the dpf oil ash volume is at zero now before was something like 0.9l
can anone please help me how they did it with obdeleven or vcds is needed here
RECENTLY i got error P245200 dpf pressure sensor "A: circuit
and i replaced with exact part with same number
now the error is gone
but i read that g450 dpf pressure sensor should be adapted with coding II or in UDS protocol
but i didnt had this coding II avilable in engine control unit and i had go with uds protocol
and it was without any luck
and i was trying to do the adaptation in obdeleven with uds protocol but nothings happenng
except glow plug light is flashing and the basic setting says that adapation ended as soon as i click the start button
and after 3 or 4 min the obdeleven dissonnects and the dpf oil ash volume is at zero now before was something like 0.9l
can anone please help me how they did it with obdeleven or vcds is needed here