lpq
New Member
Posts: 6
|
Post by lpq on Jul 5, 2022 14:22:28 GMT
Hey, I'm having some issues with one error that keeps popping up when I'm doing a full scan. It's the B201200 - Data set implausible error that shows as follows:
OBDeleven data log
Date: 2022-07-05 16:03
VIN: 3VW4T7AU2HM045613 Car: Volkswagen Golf GTI Year: 2017 Body type: 5-dr hatchback Engine: CXCA Mileage: 82041 KM
--------------------------------------------------------------- 5F Multimedia
System description: MU-S-S-US Software number: 3Q0035844B Software version: 0891 Hardware number: 3Q0035844A Hardware version: 710 ODX name: EV_MUStd4CDELP ODX version: 001001 Long coding: 02730000FF00000051110001001908009F0103D40120010002
Trouble codes: B201200 - Data set implausible static Date: 2022-04-01 17:20:17 Mileage: 80935 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 20 Dynamic environmental data: 028690
It doesn't look like a SVM code type issue, so not sure what exactly is going around. The car was from NA but most likely the MIB unit was swapped as I have it in my native language now (I live in EU). Any tips on how to investigate that further? Thanks!
|
|
|
Post by dv52 (Australia) on Jul 6, 2022 1:24:29 GMT
hmm...... not sure what has caused this DTC, but the freeze fame data is interesting for these reasons: - The date of your scan snippet was 2022-07-05 16:03
- The mileage of the car on the date of the scan snippet was 82041 km
- The first time this error was registered in the car was 2022-04-01 17:20
- The mileage of the car when the error was first registered was 80935 km
- Fault frequency = 1
Deductions: - The data in 1, 2, 3, 4 is consistent. This means that there is diagnostic intelligence in these numbers - which suggest that the error first happened about 3 x months ago (or about 1,100 km in the past)
- The data in 5 means that since first being registered in the module's fault memory, the error has not been re-registered on a subsequent ignition cycle (i.e. being the 3 x month period prior to the date of your scan)
Question: What happened to the car 3 x months ago?
Don
|
|
lpq
New Member
Posts: 6
|
Post by lpq on Aug 4, 2022 16:54:40 GMT
Hey Don, I don't recall anything specific that has been done in the car, battery wasn't unplugged or anything like that. Just threw another scan after some time and still got the same error to pop up
Trouble codes: B201200 - Data set implausible static Date: 2022-07-22 09:41:34 Mileage: 82303 km Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 91 Dynamic environmental data: 02868B The only suspicion that I have (not sure if correct) is that my GPS antenna is broken, and my MIB doesnt find any satelites at all, I checked on the green engineering menu. Could it be the reason of this fault?
|
|
|
Post by dv52 (Australia) on Aug 4, 2022 23:57:27 GMT
lpq: hmm............."green engineering screen"? Maybe a change was made in the "green engineering screen"? If so, it's problematic because these type of changes aren't recorded anywhere in OBD11 (unless you manually record these changes)! Don
|
|
|
Post by andrrei on Feb 16, 2023 3:09:22 GMT
Hello.
How did you fix the error B201200 data ser implausible? I have the same error on 5F after i have made a software update
Thanks
|
|
|
Post by audiq7999 on Dec 29, 2023 5:21:33 GMT
Hi were you able to fix this ??
|
|