|
|
Post by maxyy89 on Jun 11, 2022 12:30:55 GMT
Hi! I have installed LED footwell lights but I cannot find in OBD 11 app parameters that I need to change under 09 cent. electronics. Parametres like this IDE11477-ENG128539-Interior lighting: parameter-p_adaption_kundenwunsch_fussraum. Where is this located? Thanks in advance!
|
|
|
|
Post by vwjap on Jun 11, 2022 16:30:12 GMT
Remove the first 2 bits and look again, that’s for vcds You should see interior lighting as a menu item  |
|
|
|
Post by maxyy89 on Jun 11, 2022 17:18:59 GMT
I'm sorry can you explain a little more? What 2 bits? Also under cent. el(09) and under adaptation or? Thanks for the help.
|
|
|
|
Post by vwjap on Jun 11, 2022 18:51:46 GMT
IDE11477-ENG128539 is the channel numbers used in a different software (vcds)
And yes, 09-adaptions then in the search bar type in interior (a list comes up and select interior lighting, parameters and go into that, then scroll down until you find the item you want
|
|
|
|
Post by vwjap on Jun 11, 2022 20:30:06 GMT
But being a 2013 your module may be too old
|
|
|
|
Post by maxyy89 on Jun 11, 2022 20:56:16 GMT
But being a 2013 your module may be too old Maybe. But it's odd because they are working when you open and close door but only if car is running. Strange |
|
|
|
Post by dv52 (Australia) on Jun 11, 2022 21:58:20 GMT
But being a 2013 your module may be too old yes - "too old"!! In these earlier modules, the way that the BCM (using the VCDS notation) was told to operate the footwell light was via the long-code string. Specifically the software switch was on Byte 17, Bit 3. However, given OP's description about the "car running", I suspect that the setting above is already made!! Still - worth checking IMO Maybe also worth checking OP's history records for any pertinent modifications to the hex09 module? Don |
|
|
|
Post by maxyy89 on Jun 16, 2022 18:53:21 GMT
|
|
