|
Post by bunyamin on Jun 3, 2022 5:43:33 GMT
I have a question regarding the DPF values of my volkswagen passat 2.0 BiTDI from 2017 with 155000 km.
My engine stutters sometimes when it is running idly. So I bought a OBDEleven to read the values for the injectors, turbo and dpf. The values for the injectors and turbo were good.
The following step I took was to read the values for the DPF. I got the following values for the DPF:
Particle filter, air pressure sensor 1 bank 1, raw value : 16hPa Particle filter, soot mass measured: 3,86 g Particle filter, soot mass calculated: 15,89 g Particle filter, oil ash volume: 0,13 L Particle filter, oil ash mass: 50,5 g Particle filter ash load limit: 80 g
My question is are these values good or does this mean that my DPF is clogged ?
And if it is clogged, what can I do? Can I put addtives inside the tank to unclog it or do I have to buy a new one ?
Kind regards,
|
|
|
Post by miilits on Jun 24, 2022 13:48:24 GMT
You have a long way to go to full glogg keep calm
|
|
|
Post by kamran271990 on Feb 26, 2024 0:26:39 GMT
You have a long way to go to full glogg keep calm Can you explain which values you were referring and comparing?
|
|
|
Post by miilits on Feb 28, 2024 7:26:07 GMT
You have a long way to go to full glogg keep calm Can you explain which values you were referring and comparing? 2-3 and 5-6. First 2 are pointless numbers and the 5 and 6. They say limit is 80gr. I had my car where ash mass was allready 92gr and all worked fine. The 80gr limit is only a number. When you drive and the system burns and so it works fine
|
|