|
|
Post by filippr on Dec 1, 2020 19:17:22 GMT
]Comin Home Light Duration
Select Control unit 09 (Central Electrics)
Adaptation
Coming Home Time
Value (Default: 15 seconds - maximum: 60 seconds)
Select Control unit 09 (Central Electrics)
Adaptation
Leaving Home Time
Value(Default: 60 seconds - maximum: 60 seconds)
I tried doing this on my Audi A6 2014 pre facelift but when I go into adaptations it’s asking me to enter a channel number, where can I find this?
|
|
|
|
Post by pl4y3r on Dec 15, 2020 2:09:22 GMT
High Beam Assist Reset: Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation Channel (4) Seçim -Assistenzlichtfunktionen-Beam Assistant reset Value on not actively adjust default: active Confort Blink Cycle: Select Control unit 09 (Central Electrics) Security access Access Code 20113 Adaptation Channel 31 Valueı: 1-5 Value 3 (standard - 3x blinking) DLR Only in Auto Mode: Select Control unit 09 (Central Electrics) Security access Access Code 31347 Adaptation Channel (9) - Select daytime running lights only in switch position auto Put emphasis on active Anyone know if this work on Audi A6 C7 2017??? Thanks |
|
stu
New Member
Posts: 2
|
Post by stu on Jan 26, 2021 16:29:27 GMT
Hi folks,
Anyone know what the default setting is for the soundaktor in the A6 C7 320bhp BiTdi? I know we can code from 0 to 100% but I was curious to know what the original is, so i can estimate how much louder/quieter i can go with the tool.
Thanks,
Stuart
|
|
|
|
Post by dani07 on Apr 18, 2021 6:43:37 GMT
Hallo everyone.How to activate the towing hook on Audi a6 avant 2015. please help me
|
|
|
|
Post by ztennikas on Aug 14, 2021 13:34:36 GMT
hi, i am happy owner of obd pro. I would need to know the coding to eliminate the annoying sound when opening the driver's door with the engine running, thanks Unit 46 Coding Change Byte 15 to Hex 4F Adaptation Change Channel 98 from 1 to 0 |
|
|
|
Post by amkoski on Aug 18, 2021 8:21:02 GMT
Hello for all!
i have prestige a6 -11 have problems with head lights. I have installed new ballast and AFS module. All works fine but those modules need to coded for now. if i understand right i can do this with OBD11 pro. Im new user and need some advice how that prosedure goes.
is this correct place to ask this?
And how ist goes?
Thanks.
|
|
|
|
Post by tomek32 on Aug 22, 2021 14:31:58 GMT
Hello, I have retrofitted a trailer coupling, does someone have a coding for me? I have one but can't cope with OBD11 ...
LG
|
|
tib
New Member
Posts: 1
|
Post by tib on Aug 31, 2021 15:57:03 GMT
Need some help
OBDeleven data log
Date: 2021-08-31 16:21
VIN: WAUZZZ4G0DN051514
Car: Audi A6
Year: 2013
Body type: Saloon
Engine: CGLC
Mileage: 284310 KM
---------------------------------------------------------------
55 Headlight Regulation
System description: ....AFS13....
Software number: 4H4907357C
Software version: 0020
Hardware number: 4H4907357A
Hardware version: H01
Serial number: 120824-0004-0008
ODX name: EV_AdvanFrontSyste
ODX version: 005001
Long coding: 0000020000020000
Trouble codes:
U101300 - Control module not coded
static
Date: 2021-08-31 16:21:30
Mileage: 284310 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 24
C107E54 - Headlight No basic setting
static
Date: 2021-08-31 16:21:30
Mileage: 284310 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 24
C1082F0 - Right headlamp power output stage not coded
static
Date: 2021-08-31 16:21:30
Mileage: 284310 km
Priority: 6
Malfunction frequency counter: 1
Unlearning counter: 24
|
|
|
|
Post by amkoski on Aug 31, 2021 19:08:39 GMT
I Have exactly same problem that "tib" do Anybody knows solution about this?
|
|
|
|
Post by exoseven on Jan 14, 2022 18:20:29 GMT
Hi rockl could you post the details of all the ambient light settings for the facelift, I have the same and was only able to activate the floor lighting so far, not the controls in the MMI (I also managed to switch my instrument cluster to auto dimming and back again due to the facelift being different!). Hi I've been searching and searching for exactly what you did and just now stumbled upon your post. I no longer can control the intensity of my dash lights in the instrument cluster and dash. Can you list the steps to turn that on or off? Much appreciated! Hi there, got the same problem here on my A4 B9, can't find solution... did you finally find a way to solve this ? thanks |
|
|
|
Post by mariojuric1 on Jan 19, 2022 21:50:14 GMT
go down in history and restore everything to the factory
|
|
vibez
New Member
Posts: 2
|
Post by vibez on Jan 23, 2022 18:46:00 GMT
Hi
I need help with headlight washer… i want set time for them, example: i hold windshield washer down 2sec, then start working headlight washer few sec.
Car is A6 C7.5
Tnx
|
|
|
|
Post by sn0wd4n on Feb 1, 2022 8:19:34 GMT
Can someone guide me through on how to change the displayed model in the MMI?
It shows Sedan/Limousine although it should show Avant. 2014 S6 avant MMI: 4G0035670J J794 H53 Cheers |
|
|
|
Post by sn0wd4n on Feb 1, 2022 14:08:08 GMT
Hi I need help with headlight washer… i want set time for them, example: i hold windshield washer down 2sec, then start working headlight washer few sec. Car is A6 C7.5 Tnx I believe you can only set it to follow a certain interval of the washer.
ie: every 3 windshield washing it washes the headlights too.
|
|
|
|
Post by shpaga on Feb 5, 2022 21:58:26 GMT
Hi all,
Has anyone managed to reduce the speed from when is lane assist active? Also if anyone has managed to change time when required to take over the steering wheel.
Thank you!
|
|
|
|
Post by kxtech on Feb 27, 2022 19:32:00 GMT
Start/Stop Memory and Inversion of Button Light
STG 09 -> Adaptation -> Channel 34 (Security Code 20113)
Stock value = 20
Indictor Inversion: (+64) = 84
Memory Function: (+32) = 52
Indicator Inversion + Memory Function: 116
|
|
|
|
Post by 15s6owner on Mar 16, 2022 13:36:45 GMT
I bought my OBD Eleven tool primarily to reset my service indicator but have gotten into some of the other coding and one click apps. I have seen mentions of being able to adjust the microphone sensitivity and being able to key fob lock the car if the car is running from the outside. So far I haven't had much luck finding the adaptations or long code mentioned here. I was wondering if anyone had other suggestions. I have been able to do many other things hunting and pecking around this forum and others such as the door open ding/alarm, adding the gear indicator, adding the efficiency drive mode, the track mode screen, the comfort setting for closing or opening all the windows. My car is a C7 S6 with a 3G MMI it is the North American version of the vehicle I only have french, english and spanish as language options through the MMI. With few exceptions almost all of my long coding and adaptation names are in english. There is no one click app available for me like this: . And I have no "Funk bei Klemme 15 ein." options in english or german in the central electronics (control unit #9) or comfort systems (#46) to choose from in the adaptation list. If I knew what channel to use that might help though it makes me worried that they might not be exactly the same between the euro and NA version of the MMI since my car rejects the security code 31347. Suggested in this post: forum.obdeleven.com/thread/874/handle-locking-unlocking-active-runningI am curious if any one else has coding suggestions or had run across this. I am able to lock the car on the inside and I have done the lock and close the window method but this is not very convenient I also don't have a visually apparent adaptation to pick from the list and so if someone told me what channel this is on this would be helpful: Adjusting Microphone Sensitivity Select Control unit 5F (infotainment) Adaptation Select Mikrofonempfindlichtkeit (Microphone Sensitivity) Adjust value as you wish. Thank you in advance! |
|
|
|
Post by nettid on Mar 25, 2022 10:22:53 GMT
Hi Guys,
i want to active High beem assist on my car audi a7
When i try to insert access code to adaptations "31347"
i receive a strange message "login not allowed duration of interdiction not yet expired"
why?
Sorry for my english
|
|
|
|
Post by hannibalm on Apr 12, 2022 15:41:16 GMT
Hello. Could you post a picture of the windshield that portrays the rearview mirror of your car?
|
|
yay6
New Member
Posts: 26
|
Post by yay6 on May 5, 2022 22:58:44 GMT
Hello from New Zealand!
I have a Japanese import A6 C7 2.8 fsi. I need to change the radio settings from Japan to Europe/Australia.
On the OBDEleven website I see there is a First Gen device for Euro 39.99 and the Next Gen for Euro 59.99
I use an Android phone.
Can I use the first gen device to long code the radio area change? Is there a list posted of the long coding for the various modules using the First Gen device available?
Cheers
|
|
|
|
Post by tdrag97 on Jun 5, 2022 23:07:52 GMT
Does anyone have the default setting for 5F ?
I try to follow someone OBDeleven coding for google earth, but didn’t work. Now my PDC doesn’t show the bars during the backing up or front during parking. The rear camera come on when backing up. But no distance confirmation bars …
2018, q5 US
|
|
|
|
Post by newblackaudi on Nov 12, 2022 12:32:20 GMT
Hi,
I have lost all power windows functions.
All 4 windows just decided to stop working and moves in millilitre❗️
I have tried various you tube ways of resetting but it remains lazy to move.
Had changed out the main switch and the specialist insisted that motors etc has no issues but due to coding issues.
Workshop also scan through using VCDS and all seems fine with no faults.
Anyone had experiences with this problem please chime in ya🙏🏻
|
|
|
|
Post by newblackaudi on Nov 23, 2022 12:29:05 GMT
Hi, I have lost all power windows functions. All 4 windows just decided to stop working and moves in millilitre❗️ I have tried various you tube ways of resetting but it remains lazy to move. Had changed out the main switch and the specialist insisted that motors etc has no issues but due to coding issues. Workshop also scan through using VCDS and all seems fine with no faults. Anyone had experiences with this problem please chime in ya🙏🏻 Found the answer myself playing with Obd11 |
|
|
|
Post by newblackaudi on Nov 23, 2022 12:33:23 GMT
Hi, is there any coding for cabin light? My door is open but my dome light cant on even when the button of the cahin light is pressed. Have this same issues after switching out all cabin bulbs with led. Now I can only manually press to switch on the individual light but while opening/ closing doors it just won’t come on. Any help would be appreciated |
|
|
|
Post by weeaudi on May 31, 2023 0:14:10 GMT
Any can help with coding tail lights? 2012 C7
|
|
|
|
Post by vopa93 on Jul 30, 2023 13:08:58 GMT
I have the same problem. Did you find the solution with cabin light coding?
|
|
|
|
Post by ratlankiz on Feb 3, 2024 15:45:35 GMT
Hi for all,
Car Audi C7 2014. Maybe someone can help me with rear wiper coding, activation. The thing is what when i bought the car, it was equipped with wiper handle without rear wiper function. I think it was replaced by previous owner. Now I have replaced the handle to correct one and still the wiper do not work. After some research on the internet i found out that this coding should be in "electronics 09" module Byte 21 Bit 0 -> 1. But here comes some doubts:
1) Byte 21 "window" is without any descriptions.
2) Anyhow if i change clickboxes in Byte21 window - nothing changes.
If i go to the output test -> rear washer pump test, the rear wiper works good. In reverse gear it also works. So for me it looks like some kind of bug in the application..
Thanks in advance for any feedback.
|
|
|
|
Post by morechaostheory on Mar 11, 2024 22:29:51 GMT
Hi for all, Car Audi C7 2014. Maybe someone can help me with rear wiper coding, activation. The thing is what when i bought the car, it was equipped with wiper handle without rear wiper function. I think it was replaced by previous owner. Now I have replaced the handle to correct one and still the wiper do not work. After some research on the internet i found out that this coding should be in "electronics 09" module Byte 21 Bit 0 -> 1. But here comes some doubts: 1) Byte 21 "window" is without any descriptions. 2) Anyhow if i change clickboxes in Byte21 window - nothing changes. If i go to the output test -> rear washer pump test, the rear wiper works good. In reverse gear it also works. So for me it looks like some kind of bug in the application.. Thanks in advance for any feedback. Try Steering Coulum(16) => (Byte 2) Shows up as Rear Wiper with my (Audi A6 C7 4G5 2014) |
|
|
|
Post by ratlankiz on May 31, 2024 10:44:08 GMT
Hi,
Thanks for your reccomendation! it works now.
|
|
