Drive select with out DS button.

I have Audi A3 8V face lift 2018 model, I use following code to activate DS, I do not have DS button. But the system did not work in MMI its DS no available...Any try it on the face lift MIBII High , kindly help me what I am missing?



5F adaptation

Car_Function_List_BAP_Gen2-charisma_0x17,activated

Car_Function_List_BAP_Gen2-charisma_0x17_msg_bus, terminal 15

Car_Function_Adaptations_Gen2-menu_display_charisma,activated car function adaptations gen 2

Car_Function_Adaptations_Gen2-menu_display_charisma_over_threshold_high,activate d

address 09:

Byte 7 bit 5 Change 0 to 1 - Activates ADS

Byte 8 Bit 0 Change 0 to 1 - Enable Gearbox response difference in various ADS modes (only for Automatic transmission cars, otherwise leave as 0) already active

Byte 8 Bit 2 Change 0 to 1 - Enable Throttle response difference in various ADS modes (it is not enable in some model by factory)

Byte 8 Bit 3 Change 0 to 1 - Enable Suspension (requires electro-adjustable shocks installed as hardware , otherwise leave as 0)

Byte 8 Bit 4 Change 0 to 1 - Enable Dynamic Steering Ratio (requires special steering rack with variable turning ratio installed as hardware, otherwise leave as 0) already activated

Byte 8 Bit 5 Change 0 to 1 - Enable Sports Differential (required special differential installed as a hardware, otherwise leave as 0 )

Byte 11 Bit 7 Change 0 to 1 - Enable steering response difference in various ADS modes ( for Face Liftcars)

Byte 17 Bit 7 Change 0 to 1 - Enables ADS in the MMI Display

Security access 20113, adaptation channel 66 -> change to 47 to enable efficiency



address 44:

Byte 03, Bit 0, Change 0 to 1 - Enable ADS in steering module

Byte 0 Bit 4, change from 1 to 0, or uncheck the box (deactivate driver steering recommendation)

already de-activated