johnw
New Member
Posts: 3
|
Post by johnw on Apr 16, 2017 18:00:56 GMT
2014 a4. I cleared "service due" with adaptation channels and opened engineering menu with app. Now the car says "steering defective do not drive" and it will not turn over. Ran the scan and have multiple fault codes:
Brakes, incorrect codeing(1044) (1316) Power steering control module(1309) Kessy(1330) Terminal 30(3124) (0927) (1516) (0926) Gateway(2252)
Cleared faults codes. Locked/turned off engineering menu with app Restored all adaptation channels to old values.
Still no start and fault codes.
Anybody ran into this?
|
|
|
Post by Aiwa on Apr 20, 2017 7:42:44 GMT
To fix this issue you will need to follow this steps: Go to Comfort control unit (46) > security access > enter 16017 > adaptation > channel 188 set new value as 1 > channel 190 set new value as 1021 > go back > security access 20971 > change diagnostic session to development > clear trouble codes
|
|
johnw
New Member
Posts: 3
|
Post by johnw on Apr 21, 2017 2:52:52 GMT
thank you for the reply
this pops up when i enter the 20971 security access. (37)login not possible, lock time not yet elapsed.
I tried again about 10 minutes later and same thing came up.
|
|