|
|
Post by billy22 on Apr 15, 2017 22:44:14 GMT
So i have searched for the past few days and cant find out how to get rid of bulb out error for my new led fog lights. I got rid of all the other codes for the other leds i installed but cant figure these out. I changed my byte 18 to 1F but not sure for the fog lights because im still getting that error. Or if someone could explain where to put resistors to stop error from coming up. Thanks!
|
|
|
|
Post by Matthew on Apr 17, 2017 21:18:49 GMT
Ideally, you should have bought the LEDs with the resistor built in. What you can do is to turn off "Cold light diagnosis" for the fog lights.
On my MK5 Golf GTI in Central Electronic-09
It is Byte 18, Bit #2 (that needs to be un-ticked)
The steps above are for my MK5 Golf. They may work for your car too. You will need to cycle your ignition for about 10 seconds before you see the change (or you could manually clear the error code).
|
|
|
|
Post by billy22 on Apr 18, 2017 1:32:48 GMT
|
|
