|
|
Post by vins0101 on May 21, 2022 17:55:34 GMT
 hi, I have a Golf Sportsvan 2017 (based on Golf7) and recently I have received the obdeleven with active PRO function, and I would like to coding the ECU 09, but when I tap on complete coding (IOS), to appeare the image attached. I try also to input access code, 31347, before the tap, but nothing. Even after the ECU backup 09, a yellow triangle appears in correspondence with the coding point. On other ECU (17 for example) I didn't have this problem, I activated staging in the instrument cluster. Where am I wrong? I thank in advance to those who want to give their support to solve the problem, |
|
|
|
Post by dv52 (Australia) on May 21, 2022 20:59:36 GMT
hmm.......... I'm not familiar with the language used in your screenshot - but I suspect that the central electrics module on your car doesn't have an active long-code string.
If your mk7 was built after the latter part of 2016, your hex09 module won't have a long-code string - in cars after this period, ALL the software switches that were previously in long-code were transferred to the adaptation channel database in the module
Don
|
|
|
|
Post by vins0101 on May 22, 2022 4:51:03 GMT
Hi, thank you for your replay.
Sorry for italian language in the screen shot, means "unable to read long coding".
My car was registered in May 2017, and therefore I believe it was produced after the end of 2016.
Thanks again
Vins
|
|
