|
|
Post by millpat on Apr 13, 2017 17:27:34 GMT
Hi, The current set up for this app gives only an alternative blinking (opposite phase). It would be nice have other settings to just shift a bit the lightning from the back door signal towards the wing signal. Cheers.
|
|
|
|
Post by millpat on May 4, 2017 16:39:47 GMT
No answer from dev?
|
|
|
|
Post by Nadeem on May 23, 2017 17:39:13 GMT
Need help I bought ten credits and purchased the dynamic led turn signals for a 63 plate Audi a3 2.0tdi sline it let me use the EU on option. Checked the car and only the left turn signal is doing the dynamic thing tried going back to change it to EU OF and it says now not supported and the credits were back in account. NEED HELP.
|
|
KLCC
New Member
Posts: 6 
|
Post by KLCC on Jul 18, 2017 5:13:01 GMT
You need to program each tail light separately. Use long coding on Module 9 (credits to Audi-Sport and some other forums):
Dynamic indicators:
Control Unit : Central Electrics 09 -> Adaptation
look for: Leuchte 16BLK SLB35BLK SL KC9 (this is the left indicator when looking at the back)
Change Lichtfunktion A16 from Blinken Links Hellphase TO Blinken Links Dunkelphase.
Save.
Put on the indicator to the Left and check to make sure its alternating. For ease of coding, you can have the indicator running while you code, as soon as you save the changes the light pattern will change.
Repeat for Leuchte 17TFL R BLK SRB3TFL R BLK SR KC3 (this is the right indicator) - A17 but change it to Blinken Recht Dunkelphase.
If you get it mixed up by putting the Links Dunkelphase on KC9 or Recht on KC3, when you indicate, it will actually indicate the wrong way. Great prank to play on your mates, not so great to play on other drivers
In case you need german translation what you are doing is selecting what is the dark phase indicator ( dunken = dark ) as opposed to the original setting of light phase ( licht = light ). Links and Recht are Left and Right respectively. Leuchte means lamp.
There are a mulitude of other options in the drop down box which can change how the indicators work, some are pretty self explanatory such as aktiv 100% meaning always on, but im fairly sure if you really wanted you could code tailights, reverse lights etc to come on as an indicator as well.
|
|
klas
New Member
Posts: 6
|
Post by klas on Aug 12, 2017 20:21:10 GMT
Someone got a video for this setting???
|
|
|
|
Post by ErikW on Sept 4, 2017 10:40:55 GMT
I need the fix for this app, if you use it for the halogen light. Pls help
|
|
|
|
Post by esmanuele89 on Dec 1, 2017 8:54:46 GMT
but to set the scrolling of the arrows?
|
|
|
|
Post by esmanuele89 on Dec 1, 2017 9:01:26 GMT
i have audi a3 8v 2014 with led arrow
|
|
|
|
Post by Kris1234 on Jan 9, 2018 11:18:54 GMT
Is it posible to change the seqvens so it looks even more like semi dynamic indicators?
|
|
|
|
Post by coljeman on Oct 17, 2018 21:15:38 GMT
hi. i hawe a3 2013 with led tail indicators oem.
i hawe problem i use app cup holder fix and now my indicators not work. left not work and right always glow. on tailgate lamps...side work nomal...how to fix these? some long coding or what?
thanks.
|
|
tm
New Member
Posts: 3
|
Post by tm on Nov 5, 2018 20:32:29 GMT
i had the same issue.....left arrow is working but right is just the outer arrow working and the inner always on. Simply tried the LED Dynamic Turn signal APP again to "EU on" did the job. - Now it works again  Maybe it will help you |
|
|
|
Post by magicmanozzy on Sept 7, 2020 5:22:46 GMT
thanks for this it was very helpful.
isit possible to code a 2016 model a3 with Led lights to the 'progressive' (starts from boot lid and Led's turn on 1 by one till reaches the rear quarter) indication as the settings above are the alternate flashing?
any help will be greatful.
Regards.
|
|
|
|
Post by ancientmann on Sept 15, 2020 15:20:41 GMT
I tried the long code adaptation mentioned earlier in the thread but I guess the next gen doesn’t have the same menu format to make these changes to the standard alternating set up. Hope someone figures it out soon. 2016 S3
|
|
|
|
Post by dv52 (Australia) on Sept 16, 2020 0:21:15 GMT
ancientmann: try this:
Leuchte19BLK HRC31-Lichtfunktion A 19 > ONLY IF the setting is Blinken rechts Hellphase, change to Blinken rechts Dunkelphase.
Leuchte18BLK HLA60-Lichtfunktion A 18 > ONLY IF the setting is Blinken links Hellphase, change to Blinken links Dunkelphase.
Don
|
|
|
|
Post by zbigzbig20 on Sept 24, 2020 19:36:05 GMT
Hi. So it is possible to change led turn signals to looks like semi dynamic leds?
|
|
|
|
Post by ancientmann on Sept 27, 2020 18:08:14 GMT
There doesn't appear to be anywhere to adjust these settings on the new OBD Next Gen. "Adaption" does not show up in the Central Electrics 09 menu. The categories aren't listed the same as the previous version. I am also running on iOS so that may be a difference as well.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 27, 2020 19:38:59 GMT
Not my car but when I look in my garage I have an old 2016 A3 and like my 2014 Leon on IOS you can see that under the Long Coding you have Adaptation.
With regards to the setup the Adaption setup and descriptions are VW's not OBD11 and I know that around 2016 some of the setup's changes but Don ( dv52 (Australia)) should be able to confirm.  |
|
|
|
Post by ancientmann on Oct 1, 2020 21:28:12 GMT
Okay so I finally found the setting! Entered as suggested and didn’t really notice any change. From hellphase to Dunkelphase. Not sure if the coding is set in the correct section for my specific vehicle.
Leuchte19BLK HRC31-Lichtfunktion A 19 > ONLY IF the setting is Blinken rechts Hellphase, change to Blinken rechts Dunkelphase.
Leuchte18BLK HLA60-Lichtfunktion A 18 > ONLY IF the setting is Blinken links Hellphase, change to Blinken links Dunkelphase.
|
|
|
|
Post by dv52 (Australia) on Oct 1, 2020 22:32:23 GMT
ancientmann: As @testeronline has said - lots of stuff changed in the Central electrics modules after about mid 2016. But I suspect that your particular problem relates more to your (mis) understanding of how adaptation channels are structured and how they are accessed with OBD11. Here's a copy of one of the channels in my instructions above: Leuchte18BLK HLA60-Lichtfunktion A 18 > ONLY IF the setting is Blinken links Hellphase, change to Blinken links Dunkelphase.
Notice that the adaptation channel name has 2 x parts which are separated by a hyphen ("-"). In relational database speak this is called a Parent/Child name. So in OBD11, After you select Adaptation from the option list (as per @testeronline screen), you first need to search and find the first part of the name; Leuchte18BLK HLA60. To do this, just enter "HLA60" into the search box as shown in the first screenshot below. This should then allow you to select ALL of the the Adaptation channels in the module with the Parent name "Leuchte18BLK HLA60". Then select Lichtfunktion A 18 from the second screen below and complete the tweak. Easy!!
Don
|
|
|
|
Post by ancientmann on Oct 2, 2020 1:34:52 GMT
Here are a couple of screen shots of where I made the adjustments. As you mentioned I am mew to this so not understanding is entirely possible. Thanks for all the help.   |
|
|
|
Post by zbigzbig20 on Oct 2, 2020 5:27:52 GMT
ancientmann, if possible can you make short video how turn signals looks like now?
|
|
|
|
Post by dv52 (Australia) on Oct 2, 2020 5:58:47 GMT
Here are a couple of screen shots of where I made the adjustments. As you mentioned I am mew to this so not understanding is entirely possible. Thanks for all the help. acientmann: that's perfect!!! Now just repeat with Leuchte19BLK HRC31 (which is the Leuchte-set for the right-side lamp). Remember to use Blinken rechts Dunkelphase (not Blinken links Dunkelphase). Don
|
|
|
|
Post by ancientmann on Oct 4, 2020 19:44:19 GMT
Unfortunately video files are too big to attach.
So far I can only get my taillights to do dynamic but would love to get to semi dynamic such as in this video.
|
|
|
|
Post by dv52 (Australia) on Oct 4, 2020 20:36:23 GMT
ancientmann: I suspect the "semi dynamic" effect is not implemented via coding changes. Rather, it's done with the installation of a timer delay harness -like this:
Don
|
|
|
|
Post by ancientmann on Oct 9, 2020 1:25:26 GMT
Seems like admin is mad that I apparently double posted so I might get banned for my interaction here. Pretty funny really. Sorry if I caused any issues to you all trying to figure this stuff out. Be Kind Stay Safe,
|
|
|
|
Post by radekcro on Dec 7, 2020 23:55:40 GMT
I have a3 2014 is it possible to make dynamic turn signals without Led? I think i have halogen stock.tnx
|
|
|
|
Post by charlietango84 on Feb 16, 2021 21:02:48 GMT
Has there been a solution to long code semi-dynamic other than the rotating dynamic which have been given earlier in this thread? TIA
|
|
azeem
New Member
Posts: 3
|
Post by azeem on Feb 23, 2021 8:45:52 GMT
Here are a couple of screen shots of where I made the adjustments. As you mentioned I am mew to this so not understanding is entirely possible. Thanks for all the help. I don’t see the list in Adaptions below, my app asks for a channel. Is my app setup wrong? Why don’t I get the list to select? I have an Audi A6 2013 Sline. |
|
|
|
Post by dv52 (Australia) on Feb 23, 2021 19:45:26 GMT
azeem : This is an Audi A3/8V forum, you should ask your question on the A6 forum. Anyhow, the reason for your problem is that you appear to want to use a tweak that was intended for vehicles which were built on a MQB platform (like the Audi A3/8V) on a car that was built on a MLB platform (like your Audi A6). Can't be done because your car doesn't use UDS control modules - which means that the adaptation channels in your car are numbers rather than descriptive words (like "Leuchte18BLK....") Ask your question on the appropriate forum Don
|
|
|
|
Post by charlietango84 on Mar 9, 2021 21:36:43 GMT
For the MQB, has there been a solution for the semi dynamic signal instead of the dynamic ?
|
|
