1 Click urban Joke app failed during download

burn1ch
New Member

Posts: 5

1 Click urban Joke app failed during download May 15, 2022 16:10:19 GMT

Quote

Post by burn1ch on May 15, 2022 16:10:19 GMT

I had a battery tender on the vehicle while runner the urban joke v1 app and it failed.
Only the left side works as the urban joke and the right it's OEM.
Status on the app shows "unknown" for current value.
How do I revert it back to stock coding? I didn't make a backup since I didn't know you needed to for the 1 touch apps.

I will allow me setting it to joker v2 and it works fine but if I revert back to original its 1/2 joker v1 1/2 OEM.

Thanks, Chris

Last Edit: May 15, 2022 18:11:12 GMT by burn1ch

dv52 (Australia)
Moderator

Posts: 6,060

1 Click urban Joke app failed during download May 15, 2022 22:36:41 GMT

Quote

Post by dv52 (Australia) on May 15, 2022 22:36:41 GMT

hmm.... nowhere near enough information to even take a guess at a possible fix for this problem (incidentally - don't use one-click-apps at all and if you do - ALWAYS (emphasis ALWAYS) make a back-up, first)!!

What type of mk7.5 is this? What type of tails are installed on this car? What country? Which car-side is "1/2 OEM"? Do you have a PRO license?

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

burn1ch
New Member

Posts: 5

1 Click urban Joke app failed during download May 16, 2022 0:16:47 GMT

Quote

Post by burn1ch on May 16, 2022 0:16:47 GMT

Sorry for the lack of details.
Its a 2018 GTI with the oem LED taillights. County is USA and the passenger side runs a factory and the drivers side runs at urban Joke v1. I do have a pro license.
I was able to load urban joke v2 which works fine on both side but it if I try and set it to "original" its runs at the 1/2 oem and 1/2 v1.

dv52 (Australia)
Moderator

Posts: 6,060

1 Click urban Joke app failed during download May 16, 2022 0:48:18 GMT

Quote

Post by dv52 (Australia) on May 16, 2022 0:48:18 GMT

OK - so a Yankee car!! The Leuchte programming for USA vehicles are different to the rest-of-world models.

No guarantees - but the best that I can do is to try to generate the OEM values for the left-side tails from the right-side Leuchte-sets.

With the car set-up with OEM on the right-side, post-up screenshots of the values for:

Leuchte21BR RC8
Leuchte24SL HRA65

To be clear, I need to see ALL 19 x channels for each of the two Leuchte-sets above.

Don

Last Edit: May 16, 2022 0:50:32 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

burn1ch New Member Posts: 5	1 Click urban Joke app failed during download May 16, 2022 21:37:37 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by burn1ch on May 16, 2022 21:37:37 GMT Thanks Don. Hopefully this is what your looking for.
	Last Edit: May 16, 2022 21:38:14 GMT by burn1ch

dv52 (Australia)
Moderator

Posts: 6,060

1 Click urban Joke app failed during download May 17, 2022 22:02:32 GMT

Quote

Post by dv52 (Australia) on May 17, 2022 22:02:32 GMT

hmm.........the values in your pictures are very odd programming for LED tails (even on a USA model mk7)!!!

If I'm reading your values correctly, the brake light on your car doesn't operate in a dimmed mode as Parking Lights (PL)

I think you call them "position lights". And, the inner lamp operates at full illumination as PL (should be dimmed so as not to be confused with Brake light)

Anyhow, below is my suggestion as to how the inner/outer lamps for LED tails on a NAR model "should be" programmed (including PL function of the outer lamps)

Leuchte20BR LA71 (Left outer Tail)
Lasttyp 20 > 35 - kombinierte LED Blink-Bremsleuchten
Lampendefektbitposition 20 > 13
Fehlerort mittleres Byte DTC-DFCC 20 > 3D
Lichtfunktion A 20 > Bremslicht
Lichtfunktion B 20 > Blinken links Hellphase
Dimmwert AB 20 > 100
Lichtansteuerung HD AB 20 > Always
Lichtfunktion C 20 > Blinken links Dunkelphase
Lichtfunktion D 20 > not active
Dimmwert CD 20 > 0
Dimming Direction CD 20 > minimize
Lichtfunktion E 20 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion F 20 > not active
Dimmwert EF 20 > 36
Dimming Direction EF 20 > maximize
Lichtfunktion G 20 > not active
Lichtfunktion H 20 > not active
Dimmwert GH 20 > 0
Dimming Direction GH 20 > maximize

Leuchte21BR RC8 (Right Outer)
Lasttyp 21 > 35 - kombinierte LED Blink-Bremsleuchten
Lampendefektbitposition 21 > 23
Fehlerort mittleres Byte DTC-DFCC 21 > 3E
Lichtfunktion A 21 > Bremslicht
Lichtfunktion B 21 > Blinken rechts Hellphase
Dimmwert AB 21 > 100
Lichtansteuerung HD AB 21 > Always
Lichtfunktion C 21 > Blinken rechts Dunkelphase
Lichtfunktion D 21 > not active
Dimmwert CD 21 > 0
Dimming Direction CD 21 > minimize
Lichtfunktion E 21 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion F 21 > not active
Dimmwert EF 21 > 36
Dimming Direction EF 21 > maximize
Lichtfunktion G 21 > not active
Lichtfunktion H 21 > not active
Dimmwert GH 21 > 0
Dimming Direction GH 21 > maximize

Leuchte23SL HLC10 (Left Inner)
Lasttyp 23 > 43 - allgemeine LED
Lampendefektbitposition 23 > 0A
Fehlerort mittleres Byte DTC-DFCC 23 > 29
Lichtfunktion A 23 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion B 23 > not active
Dimmwert AB 23 > 36
Lichtansteuerung HD AB 23 > Always
Lichtfunktion C 23 > not active
Lichtfunktion D 23 > not active
Dimmwert CD 23 > 0
Dimming Direction CD 23 > maximize
Lichtfunktion E 23 > not active
Lichtfunktion F 23 > not active
Dimmwert EF 23 > 0
Dimming Direction EF 23 > maximize
Lichtfunktion G 23 > not active
Lichtfunktion H 23 > not active
Dimmwert GH 23 > 0
Dimming Direction GH 23 > maximize

Leuchte24SL HRA65 (Right Inner)
Lasttyp 24 > 43 - allgemeine LED
Lampendefektbitposition 24 > 1A
Fehlerort mittleres Byte DTC-DFCC 24 > 2A
Lichtfunktion A 24 > Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion B 24 > not active
Dimmwert AB 24 > 36
Lichtansteuerung HD AB 24 > Always
Lichtfunktion C 24 > not active
Lichtfunktion D 24 > not active
Dimmwert CD 24 > 0
Dimming Direction CD 24 > maximize
Lichtfunktion E 24 > not active
Lichtfunktion F 24 > not active
Dimmwert EF 24 > 0
Dimming Direction EF 24 > maximize
Lichtfunktion G 24 > not active
Lichtfunktion H 24 > not active
Dimmwert GH 24 > 0
Dimming Direction GH 24 > maximize

Don

Last Edit: May 18, 2022 2:55:38 GMT by dv52 (Australia)

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

burn1ch New Member Posts: 5	1 Click urban Joke app failed during download May 17, 2022 22:20:54 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by burn1ch on May 17, 2022 22:20:54 GMT Correct the brake lights operate separate from the "parking" lights and the directional. I wonder if I'm at the point to have it reflashed back to original from a dealership?

dv52 (Australia) Moderator Posts: 6,060	1 Click urban Joke app failed during download May 17, 2022 23:53:38 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by dv52 (Australia) on May 17, 2022 23:53:38 GMT Entirely your decision - why not try my suggestion (I've added it to my previous reply) and if it doesn't work to your liking, then throw money at a dealer. It's a lower cost solution - if my suggestion is OK Don
	Last Edit: May 17, 2022 23:55:22 GMT by dv52 (Australia) Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you

burn1ch New Member Posts: 5	1 Click urban Joke app failed during download May 18, 2022 1:18:37 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by burn1ch on May 18, 2022 1:18:37 GMT I ran the coding you provided. The right side has the directional flashing on the lower outer lamp which is correct but the left drivers side is using the inner left lamp as a directional along with the lower outer left.

dv52 (Australia)
Moderator

Posts: 6,060

1 Click urban Joke app failed during download May 18, 2022 3:02:41 GMT

Quote

Post by dv52 (Australia) on May 18, 2022 3:02:41 GMT

hmm......that's Impossible!!!

Look at my suggestion above - the inner-left lamp does NOT have a Leuchte-command for directional flashing (I assume you mean turn-signal). And neither does the inner-right lamp have directional flashing

In fact, the inner-left lamp has exactly the same coding for the Lichtfunktion channels as the inner-right lamp. Maybe recheck your changes

Don

Please don't ask questions about car coding/repair via the forum "Message" function. The better place for such dialogue is in the forum proper. That way, the wider expertise of the entire forum community can be applied to solve your problem - thank you