|
|
Post by lorneranger on May 11, 2022 21:13:40 GMT
Hello, Just wondering if anyone could post the stock settings for the mk7 left and right indicators under adaption codings for Leuchte 0 BLK VL B36 and Leuchte1BLK VRB20. I have tried copying the exact same stock settings from a mk7.5 R (Screenshots below), but now the front headlamp indicators on the Mk7 do not activate at all.   |
|
|
|
Post by dv52 (Australia) on May 12, 2022 20:52:05 GMT
Try this: Leuchte 0 BLK VL B36- Lichtfunktion A 0 > Blinken links Hellphase
- Dimmwert AB 0 > 127
Leuchte1BLK VRB20- Lichtfunktion A 1 > Blinken rechts Hellphase
- Dimmwert AB 1 > 127
Don
|
|
|
|
Post by lorneranger on May 13, 2022 14:52:05 GMT
Thanks Don, I'll try these out.
Something I found odd is that in the Mk 7.5, these settings are Nicht Aktiv and 0, but the front indicators still worked.
Or, is it a different module in the 7.5 for indicators?
|
|
|
|
Post by dv52 (Australia) on May 13, 2022 20:31:09 GMT
hmm........... OK, you said on your first post that the car was a mk7. On some mk7.5s, the front turn signal lamps are operated by Light Control Module (LCM) - not by the central electrics module. If this is the case, OBD11 can't be used to access LCMs
Don
|
|
|
|
Post by lorneranger on May 14, 2022 7:53:34 GMT
Yes, correct, it's a mk7, it had blinkers set as DRLs, so to return to stock I tried to mirror the settings from a mk 7.5, but, when I did this, the indicators on the mk7 stopped activating all together.
|
|
|
|
|
|
Post by dv52 (Australia) on May 16, 2022 20:32:56 GMT
valk: it was kind of you to post-up the suggestion - but your settings are for incandescent lamps. OP's pictures show that the lamps on his (her?) car are LEDs Don
|
|
valk
Full Member
Posts: 112
|
Post by valk on May 16, 2022 20:46:57 GMT
You’re right, my bad. Missed that part by reading to fast 😅
|
|
|
|
Post by lorneranger on May 17, 2022 11:42:39 GMT
Thanks All,
changed the settings this morning and all working again.
|
|
