|
Post by bearthly on May 6, 2022 14:39:27 GMT
2013 Jetta TDI I do not have any LED lights. All lights are new and working. When turning headlights on I get a Bulb Failure warning- low beam left, low beam right, high beam, license plate light out etc... I would like to code the check bulb completely out. Any ideas?
|
|
|
Post by bearthly on May 8, 2022 2:28:23 GMT
Also, when looking at live data voltage loads for all bulbs, all show 90% except both tail lights at 25%. They were changed out and still 25% load.
|
|