|
Post by greypanter on Apr 11, 2017 5:29:44 GMT
Any OBD11 tweak to have the mk7 to display oil temp sooner! Meaning oil temp pups up at a lower temp than 122? Let's say at 80 or even 100.
|
|
|
Post by greypanter on Apr 12, 2017 23:18:05 GMT
No 1!?
|
|
|
Post by dv52 (Australia) on Apr 13, 2017 3:24:13 GMT
greypanter: I assume that you are referring to the temperature at which the display changes from"---" to an actual reading. I'm fairly certain that this is determined by firmware, not code-string, or adaptation channel values.
Bear in mind that it's a good thing for the oil temperature to exceed at least 100 degrees C because it will boil-off any water condensate that has been absorbed by the oil in the previous ignition cycle
Don
|
|