fosco
New Member
Posts: 3
|
Post by fosco on May 2, 2022 11:20:56 GMT
Hi, as VW is not able to provide the software shop for ACC (as with golf mk8), I would like to know if anybody already enabled ACC successfully? ID.3 Pure should have the hardware.
|
|
|
Post by mojojojo on May 2, 2022 12:44:16 GMT
Im also interested in this. Following this thread. ID.3 Pro without ACC and Travel assist here.
|
|
|
Post by marcozborn on Jul 25, 2022 8:20:44 GMT
Same interest here, Cupra Born without acc
|
|
sidot
New Member
Posts: 1
|
Post by sidot on Jul 1, 2023 20:02:25 GMT
...any news in this case?
|
|
|
Post by energetik on Mar 19, 2024 20:33:25 GMT
I have an Id.3 pro 58kw, October 2021, without ACC. I have lane assist and front assist, a heated leather steering wheel and VZE = Verkehrszeichenerkennung (traffic sign recognition). I have version 3.2 software. My car have 8T8 radar sensor (only Geschwindigkeitsbegrenzer) so this means that ACC isn't available. I would need 8T9 option among equipment (for ACC). I believe that there are a lot of forum members who have the same situation and would like to have ACC or even TA. So my question is (if anyone already tried that): -changing radar behind the front bumper to this one 1EA907572D (or H, G?) and I hope that it is possible to calibrate with ODBeleven pro-ultimate; -With odbeleven I would enable (I already this that and it did not work and after that I discovered that radar isn't the right one) ACC + TA -I would use the existing steering wheel and I would buy a Hands of module and I think it should work. So no need to change the Steering wheel to capacitive or move it every 15 sec. Did anyone manage to be successful at doing this?
|
|
|
Post by zdenekid4 on Apr 12, 2024 8:25:41 GMT
The radar costs 100 euros and is available online. That's fine. I just don't know where to code and what exactly. If there is info, I will test it. I have access to ODIS and OBD11. VCDS .. I have an ID4 where there is not even a regular cruise control but only a limiter - it limits the speed.
|
|