|
|
Post by meramez on May 2, 2022 10:09:07 GMT
Vehicle:
Audi A4 B9 Facelift 2020-
App name:
Active lane assist
Description:
Same as Lane Assist Step 1 & 2 for Audi A4 2016-2019 B9
Control unit:
No technical information
Function:
No technical information
Procedure:
No technical information
|
|
|
|
Post by One-Click apps developer on May 2, 2022 12:50:18 GMT
|
|
|
|
Post by meramez on May 5, 2022 8:11:20 GMT
Thank you for your quick response and sorry for my delayed one. I'm going to perform the backup today, just highlighting that I'm a bit scared to do the backup due to some old reports that it caused some trouble with other B9 vehicles sunroof operation. I hope it got resolved.
"Troubles with the Sunroof / Sunshad" post.
|
|
|
|
Post by One-Click apps developer on May 5, 2022 11:09:54 GMT
Hello,
We are aware of this issue, we managed to replicate and investigate the issue, and it seems that the problem is with the vehicle itself. More likely with the software version of the control unit.
Here is what you need to do in order to fix the issue:
Follow the link below:https://support.obdeleven.com/en/articles/5608805-full-backup
You will find at the end of this FAQ how to restore the long coding original value. The original coding you should put in the control unit sunroof is 608000049202
Once you will insert this code, save it, leave your car and lock it.
Go a bit further from your vehicle, with the key with you, until your vehicle's headlights will turn off.
Once that happens, return to your vehicle.
Press and hold down your sunroof button, until the sunroof will completely open and close.
Connect the OBDeleven to your vehicle -> open the control unit Sunroof (CA) -> basic settings -> and run basic setting “Roof roller blind, calibration”.
After these steps, it should work as before.
Let me know how it goes.
|
|
|
|
Post by meramez on May 6, 2022 15:16:14 GMT
Backup completed and all went well. |
|
|
|
Post by One-Click apps developer on May 9, 2022 8:32:12 GMT
Hello,
Thank you for the request. The app "Lane Assist" has been added. Please try, and give us feedback.
|
|
|
|
Post by meramez on May 11, 2022 4:46:41 GMT
Hello, Thank you for the request. The app "Lane Assist" has been added. Please try, and give us feedback. Thank you so much. I shall try and update you  |
|
|
|
Post by meramez on May 20, 2022 8:08:11 GMT
Hi, I tried it today, followed all the instructions, engine not running, ignition on and the hood was opened.
I received the "not supported message"
Tried so many times with no luck
|
|
|
|
Post by One-Click apps developer on May 20, 2022 10:12:28 GMT
Hello,
Thank you for your feedback.
I will see why this could have happened. I will let you know when I fix it.
|
|
|
|
Post by meramez on May 21, 2022 21:57:21 GMT
Thank you, I did the activation using Long coding and adaptation and went fine. I believe the issue was that my car doesn't have Side Assist (blind spot) so when I avoided it it went fine, yet to be tested.
Is there a possibility to have an activation/deactivation in the MMI? Or possibly adding the Steering Correction to the MMI?
|
|
|
|
Post by One-Click apps developer on May 24, 2022 14:01:38 GMT
Hello,
We have revised and divided the program into two parts, as well as other existing Audi Lane Assist programs.
The applications "Lane Assist Step 1, and Lane Assist Step 2" has been added. Please try, and give us feedback.
|
|
|
|
Post by meramez on May 24, 2022 18:19:14 GMT
Thank you so much for your actions. Can I ask if this will add a feature to the MMI to activate/deactivate the system?
Also will this add "Steering correction" -> "Early/Late" to the MMI?
|
|
|
|
Post by meramez on Apr 9, 2023 5:21:27 GMT
Hello, We have revised and divided the program into two parts, as well as other existing Audi Lane Assist programs. The applications "Lane Assist Step 1, and Lane Assist Step 2" has been added. Please try, and give us feedback. The second part gives "not supported" error. |
|
