|
|
Post by spains on Mar 30, 2022 21:23:41 GMT
Hello everybody. Motheroopsers broke my rear window. I relied on a professional company for the change. After scanning with OBD I got error B127413. FM radio and DAB are working very well. Where is the problem? Error screenshot: ibb.co/2jbTt7d |
|
|
|
Post by dv52 (Australia) on Mar 30, 2022 22:43:34 GMT
So - it's difficult to believe that repairing a broken rear window somehow has caused a "Control module incorrectly coded" error on the MIB. I suspect that the two events are totally disconnected
A more likely scenario is that the error was caused by a coding change -I suggest that you look at the entries in your History records relating to the hex5F module
Don
|
|
|
|
Post by spains on Mar 31, 2022 10:35:07 GMT
On the 5F module I did not do any coding, except the offroad menu which was activated well. I can guarantee what I do.
Update today: The error has turned green, and has now disappeared with the last scan. The other error also disappeared as I checked the byte24_navigation_system (active > disactive) and the adaptations to disable the offroad menu.
Crazy.
|
|
|
|
Post by Carolco on Apr 3, 2022 9:49:33 GMT
Hello.
I don’t think that the off road menu is relaciónate with the fault. It is true that if you don’t have navigation system in your infotaintment and you make the process of the codification for the off road menu, one of the step is modify the byte 24 Navigation system. And this make a fault in the 5F unit about module incorrectly codification.
I think that the reparation of the rear window of the trunk maybe touch any conector of the antenna…. And derívate of this event, you have an error of open circuit. Sometimes a bad conection is gone with a simple touch of the wires or conection in the trunk part of the car…
|
|
